Downloads Archive | Page 2 of 2

Effect of in-situ hydrogen charging on the mechanical properties of advanced high strength steels – Tom Depover, ir.; Diana Pérez Escobar, dr. ir.; Elien Wallaert; Zinedine Zermout, dr. – International Journal of Hydrogen Energy, Vol. 39 (2014) pp. 4647–4656
Phase transformations during decomposition of austenite between MS and Mf in low-carbon steels – Elisabete Pinto da Silva, Wei Xu, Cecilia Föjer, Yvan Houbaert, Jilt Sietsma, Roumen H. Petrov – Materials Characterization, Vol. 95 (2014) pp. 85–93
An alternative to the crystallographic reconstruction of austenite in steels – N. Bernier, L. Bracke, L. Malet, S. Godet – Materials Characterization, Vol. 89 (2014) pp. 23–32
Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel – D. DeKnijf, R. Petrov, C. Föjer – Materials Science And Engineering – A – Structural Materials, Vol. 615 (2014) pp. 107–115
Microstructural Control of Ductile Crack Propagation in TMCP HSLA Pipeline Steels – V. Carretero Olalla, N. Sanchez, P. Thibaux, R. H. Petrov, L.A.I. Kestens – Advanced Materials Research, Vol. 922 (2014) pp. 568-573
Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters – Victor Carretero; Vitaliy Bliznuk; Nuria Sanchez; Philippe Thibaux; Leo A. I. Kestens; Roumen H. Petrov – Materials Science And Engineering – A – Structural Materials, Vol. 604 (2014) pp. 46–56
Experimental study on the contact angle formation of solidified iron–chromium droplets onto yttria ceramic substrates for the yttria/ferrous alloy system with variable chromium content – K. Verhiest, S. Mullens, J. Paul,I. De Graeve, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken – Ceramics International, Vol. 40 (2014) pp. 2187–2200
Comprehensive study on the sintering behavior of yttria nano-powder in contact with electrolytic iron using the rapid solidification processing technique – K. Verhiest, S. Mullens, J. Paul,I. De Graeve, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken – Ceramics International, Vol. 40 (2014) pp. 7679–7692
Corrosion product identification at the cut edge of aluminum‐rich metal‐coated steel – A. Alvarez-Pampliega, K. Van den Bergh, J. De Strycker, T. Segato, M. P. Delplancke-Ogletree and H. Terryn – Materials And Corrosion – Werkstoffe Und Korrosion, Vol. 65, 4 (2014) pp. 383–391
Corrosion Study on Al-rich Metal-Coated Steel by Odd Random Phase Multisine Electrochemical Impedance Spectroscopy – A. Alvarez-Pampliega T. Hauffman M. Petrova T.Breugelmans T. Muselle K. Van den Bergh J. De Strycker H.Terryn A. Hubin – Electrochimica Acta, Vol. 124 (2014) pp. 165–175
A sessile drop setup for the time-resolved synchrotron study of solid-liquid interactions: Application to intermetallic formation in 55%Al-Zn alloys – N. Bernier, G. B. M. Vaughan, D. De Bruyn, H. Vitoux, M. De Craene, H. Gleyzolle, B. Gorges, J. Scheers and S. Claessens – Applied Physics Letters, Vol. 104 (2014) pp. 171608
Advances in the development of corrosion and creep resistant nano-yttria dispersed ferritic/martensitic alloys using the rapid solidification processing technique – K. Verhiest, S.Mullens, I.DeGraeve, N.DeWispelaere, S.Claessens – Ceramics International, Vol. 40 (2014) pp. 14319–14334
Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High- Strength Steels – N. Bernier, L. Bracke, L. Malet, S. Godet – Metallurgical And Materials Transactions A, Vol. 45 (2014) pp. 5937-5955
Increase of martensite start temperature after small deformation of austenite – B.B. He, W. Xu, M.X. Huang – Materials Science And Engineering – A – Structural Materials, Vol. 609 (2014) pp. 141-146
Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel – Elisabete Pinto da Silva, Wei Xu, Cecilia Föjer, Yvan Houbaert, Jilt Sietsma, Roumen H. Petrov – Advanced Materials Research, Vol. 922 (2014) pp. 682-687
Predicting the Austenite Fraction After Intercritical Annealing in Lean Steels as a Function of the Initial Microstructure – Hao Chen, Xiaojun Xu, Wei Xu, Sybrand van der Zwaag – Metallurgical And Materials Transactions A, Vol. 45 (2014) pp. 4
Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension – D. De Knijf, T. Nguyen-Minh, R. H. Petrov, L. A. I. Kestens and John J. Jonas – Journal of Applied Crystallography, Vol. 47 (2014) pp. 1261–1266
Quantitative Investigation of Brittle Out-of-plane Fracture in X70 Pipeline Steel – F Tanckoua, J Crépin, P Thibaux, S Cooreman, AF Gourgues-Lorenzon – Procedia Materials Science, Vol. 3 (2014) pp. 1149-1154

Advances in Post-necking Flow Curve Identification of Sheet Metal through Standard Tensile Testing – Sam Coppieters, Steven Cooreman, Dimitri Debruyne and Toshihiko Kuwabara – – The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, Januari 2014
Study of the electrochemical behaviour of aluminized steel – B. Lemmens, Y. Gonzalez Garcia, B. Corlu, J. De Strycker, I. De Graeve and K. Verbeken – ICMCTF 2014: 41th International Conference on Metallurgic Coatings and Thin Films, San Diego, USA, April 2014
Effect of hot band annealing conditions on the microstructure and magnetic properties of thin gauge low loss fully processed electrical steels – T. Van De Putte, E. Leunis, X. Chassang, S. Jacobs – dom – International conference on Magnetism and Metallurgy WMM’14, Cardiff, United Kingdom, Juni 2014
Performance improvement for transformer core design with key developments in grain-oriented electrical steel – L. Vandenbossche, S. Jacobs, D. Kajfos – CWIEME (Coil Winding, Insulation & Electrical Manufacturing) June 24-26, 2014 Berlin , Berlin, Germany, Juni 2014
Industrialisation of Surface Treatment with Electrodeposition Processed from Ionic Liquids – P. Verpoort – 2nd Surface Treatment Symposium, Istanbul, Turkey, Juni 2014
Effect of Hot Rolling Parameters on Direct Quenched Low Alloy – Lieven Bracke*, Wei Xu, Tom Waterschoot – ICOMAT – International Conference on Martensitic Transformations, Bilbao, Spain, Juli 2014
Chromium electrodeposition using deep eutectic solvents: Recent developments and future challenges in commercial scale processing – Andrew Abbott, Eva Diaz Gonzalez – EUCHEM 2014, Tallinn, Estonia, Juli 2014
Anwendung hochfester Stahlsorten in Konstruktion und Fertigung – Einsatz für Baumaschinen und Landmaschinen – Christoph Gerritsen, John Vande Voorde – – Einsatz von hoch- und höchstfesten Stählen in der NFZ-Industrie – Potentiale/Grenzen/Restiktionen, Zweibrücken, Germany, Juli 2014
Design validation of field-applied spacers for natural gas transmission pipeline – P Thibaux S Cooreman F Cochard S Cozzolino – – Field Joint Coating 2014, Düsseldorf, Germany, September 2014
Girth weldability evaluation of SWAH pipes produced from 23.7 mm thick, high-Nb containing X70 linepipe steel – Ö. E. Güngör, M. Liebeherr, H. Luccioni – IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
Development of X80 line pipe steel for spiral welded pipes with low temperature toughness and excellent weldability – Nuria Sanchez, Özlem E. Güngör, Martin Liebeherr,Nenad Ilić – IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
Measurement of Mechanical Properties on Line Pipe: Comparison of Different Methodologies – Steven Cooreman, Dennis Van Hoecke, Martin Liebeherr, Philippe Thibaux and Mary Yamaguti Enderlin – IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
Determination of CTOD Resistance Curves in SENT Specimens With a Tilted Notch – Koen Van Minnebruggen, Matthias Verstraete, Rudi Denys, Philippe Thibaux and Wim De Waele – IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
Magneto-optical and field-metric evaluation of the punching effect on magnetic properties of electrical steels with varying alloying content and grain size – H. Naumoski, A. Maucher, U. Herr, L. Vandenbossche, S. Jacobs, X. Chassang – International Electric Drives Production Conference and Exhibition 2014, Nürnberg, Germany, September 2014
Erweiterte Anwendbarkeit von hoch- und höchst-festen Stählen für ermüdungsbeanspruchte, geschweißte Komponenten – Christoph Gerritsen, Sofie Vanrostenberghe – 7. Rostocker Schweisstage, Rostock, Germany, November 2014
Upscaling challenges in electrodeposition of metals from deep eutectic solvents – Eva Diaz Gonzalez – Interfacial and transport properties of ionic liquids, Santiago de Compostela, Spain, November 2014

Properties of FA-CVD silica coated steel sheet after deformation: coating integrity and corrosion related forming limit curve – René Hausbrand, Tom Van der Donck, Jean-Pierre Celis, Francis Clarysse – Corrosion Engineering, Science and Technology, Vol. 48(7) (2013) pp. 530-36
Influence of finishing rolling variables on the austenite recrystallization and grain growth – V. Carretero Olalla, N. Sanchez Mouriño, P. Thibaux, L.A.I. Kestens, R. H. Petrov – Materials Science Forum, Vol. 753 (2013) pp. 439-442
Physical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline Applications – V. Carretero Olalla, N. Sanchez Mouriño, P. Thibaux, L.A.I. Kestens, R Petrov – Materials Science Forum, Vol. 762 (2013) pp. 70-75
EBSD study of angular deviations from the Goss component in grain-oriented electrical steels – Nicolas Bernier, Elke Leunis, Carlos Furtado, Tom Van De Putte, Gabor Ban – Micron, Vol. 54-55 (2013) pp. 43-51
Structure analysis of aluminium silicon manganese nitride precipitates formed in grain-oriented electrical steels – Nicolas Bernier, Chris Xhoffer, Tom Van De Putte, Montserrat Galceran, Stéphane Godet – Materials Characterization, Vol. 86 (2013) pp. 116-126
The effect of electrical steel properties on the temperature distribution in direct-drive PM synchronous generators for 5MW wind turbines – Damian Kowal, Luc Dupré, Peter Sergeant, Lode Vandenbossche – IEEE Transactions On Magnetics, Vol. 49 (10) (2013) pp. p.5371-5377
Design of low hardness abrasion resistant steels – Xiaojun Xu, Wei Xu, Sybrand van der Zwaag – Wear, Vol. 301 (2013) pp. 89-93
Scanning Kelvin force microscopy study at the cut‐edge of aluminum rich metal coated steel – A. Alvarez-Pampliega, Y. Gonzalez-Garcia, K. Van den Bergh, J. De Strycker and H. Terryn – Materials And Corrosion – Werkstoffe Und Korrosion, Vol. 66 (2013) pp. 16-22
Study of local Na+ and Cl− distributions during the cut-edge corrosionof aluminum rich metal-coated steel by scanning vibrating electrode and micro-potentiometric techniques – A. Alvarez-Pampliega, M.G. Taryba, K. Van den Bergh, J. De Strycker, S.V. Lamaka, H. Terryn – Electrochimica Acta, Vol. 102 (2013) pp. 319– 327
Mechanism of corrosion protection of hot-dip aluminium–silicon coatings on steel studied by electrochemical depth profiling – Iris De Graeve, Ine Schoukens, Alex Lanzutti, Francesco Andreatta, Ana Alvarez-Pampliega, Joost De Strycker, Lorenzo Fedrizzi, Herman Terryn – Corrosion Science, Vol. 76 (2013) pp. 325–336
Effect of surface composition and microstructure of aluminised steel on the formation of a titanium-based conversion layer – Ine Schoukens, Isabelle Vandendael, Joost De Strycker, Adli A. Saleh, Herman Terryn, Iris De Graeve – Surface & Coatings Technology, Vol. 235 (2013) pp. 628–636

Reduced-thickness CVN testing to represent slant failure of pipelines – J. Van Wittenberghe, P. Thibaux, P. Goes – SCAD 2013: Sustainable Construction & Design, Gent, Belgium, Februari 2013
Fatigue characterization of Electrical Steels for designing high efficiency electrical machines for automotive traction – Dennis VAN HOECKE, Bastien WEBER, Sigrid JACOBS, Emmanuel ATTRAZIC, Sébastien BERGAMO, Richard MONTAUDON – SF2M—JIP 2013 – FATIGUE BEHAVIOUR: FROM SPECIMEN TO STRUCTURE, Paris, France, Mei 2013
Austenite Stability Study by Micro-Tensile Testing of Q&P Steel – Dorien De Knijf, Roumen Petrov, Cecilia Föjer, Leo A.I. Kestens – – Int. Symposium on New Developments in Advanced High Strength Sheet Steels, Vail, Colorado, USA, Juni 2013
Industrial Production of Quenching and Partitioning Steel – C. Föjer, J. Mahieu, N. Bernier – – Int. Symposium on New Developments in Advanced High Strength Sheet Steels, Vail, Colorado, USA, Juni 2013
Estimation of weld induced residual stresses of thick welded sections using numerical welding simulation – Yogendra (San) Gooroochurn, Philippe Thibaux, Steven Cooreman and Joachim Antonissen – ASME 2013 Pressure Vessels & Piping Conference, Paris, France, Juli 2013
Atmospheric DBD plasma processes for production of lightweight composites – D. Vangeneugden, B. Verheyde, J. Wielant – International Symposium on Plasma Chemistry, Cairns, Australia, Augustus 2013
Delamination of pipeline steels: determination of an anisotropic cleavage criterion – F. TANKOUA, J. CREPIN, P. THIBAUX, M. ARAFIN, S. COOREMAN, A.F. GOURGUES – 21ème Congrès Français de Mécanique, Bordeaux, France, Augustus 2013
Improving traction motor performance via ArcelorMittal’s iCARe electrical steel range for automotive applications: a numerical comparison – Lode Vandenbossche, Sigrid Jacobs, Maarten Van Poucke, Emmanuel Attrazic – Coiltech 2013, Pordenone, Italy, September 2013
Weldability Assessment of 24 mm X80 Linepipe Steel for Spiral Welded Pipe – Ö. E. Güngör, M. Liebeherr, P. Fize – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
Microstructural control of fracture splitting in HSLA pipeline steels – V. Carretero Olalla, A. Gervasyev, N. Sanchez, P. Thibaux, L.A.I. Kestens, I. Pyshmintsev, R. H. Petrov – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
Development of 24mm X80 linepipe steel for spiral pipes with low-temperature toughness – N. Sanchez, N. Ilic, M. Liebeherr –Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
Advanced pipeline steels for severe-sour applications – M.A. Arafin, M. Liebeherr, N. Sanchez, B. Michel, P. Fize – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
Measurement of mechanical properties on line pipe: difficulties and pitfalls – Steven Cooreman, Dennis Van Hoecke, Martin Liebeherr and Philippe Thibaux – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
New UV-curable paints for metal: high throughput experimentation for coating development – Philippe Legros, Erwin Bauters – RadTech Europe 2013, Basel, Switzerland, Oktober 2013
Improved magnetic modelling of high-efficiency induction machines, taking into account the impact of electrical steel lamination punching on the magnetisation curve and iron loss – Lode Vandenbossche, S. Jacobs – 3rd International Electric Drives Production Conference and Exhibition 2013, Nürnberg, Germany, Oktober 2013
Iron loss modelling which includes the impact of punching, applied to high-efficiency induction machines – L. Vandenbossche, X. Jannot, M. McClelland, S. Jacobs, J. Saint-Michel, E. Attrazic – 3rd International Electric Drives Production Conference and Exhibition 2013, Nürnberg, Germany, Oktober 2013
Effect of punching and stress concentrations on mechanical behaviour of electrical steels – Dennis Van Hoecke, Sigrid Jacobs, Lode Vandenbossche, Bastien Weber, Emmanuel Attrazic – EVS27. Electric Vehicle Symposium and Exhibition, Barcelona, Spain, November 2013
Diode laser weld toe re-melting as a means of fatigue strength improvement – Christoph Gerritsen, Sofie Vanrostenberghe and Matthew Doré – Fatigue design 2013, Senlis, France, November 2013
Combined martensite and bainite formation from austenite decomposition in HSLA steel – Elisabete Pinto da Silva, Wei Xu, Cecilia Föjer, Yvan Houbaert, Jilt Sietsma, Roumen H. Petrov – THERMEC 2013, Las Vegas, USA, December 2013

Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques – A. Alvarez Pampliega, S. Lamaka, M. Madani, J. De Strycker, E. Tourwé, M.G.S. Ferreira, H. Terryn – Electrochimica Acta, Vol. 61 (2012) pp. 107-117
How to Analyse Unknown Samples by Pyrolysis GC/MS? – Joeri Vercammen, Valérie Winne and Myriam Madani – Separation Science, Vol. 4 (2012) pp. 11-14
Nano-yttria dispersed stainless steel composites composed by the 3 dimensional fiber deposition technique – K. Verhiest, S. Mullens, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken – Journal Of Nuclear Materials, Vol. 428 (2012) pp. 54-64
Formulation and preparation of low-concentrated yttria colloidal dispersions – K. Verhiest, S. Mullens, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken, Y. Houbaert – Ceramics International, Vol. 38 (2012) pp. 2701-2709
Numerical and experimental study of the multi-axial quasi-static strength of clinched connections – Sam Coppieters, Pascal Lava, Renaat Van Hecke, Steven Cooreman, Hugo Sol, Paul Van Houtte and Dimitri Debruyne – International Journal of Material Forming, Vol. 6 (2012) pp. 437-451
Strain induced inward grain growth during recrystallisation in steel – Jai Gautam, Roumen Petrov, Elke Leunis and Leo A.I. Kestens – Materials Science Forum, Vol. 715-716 (2012) pp. pp 303-308
Thermal desorption spectroscopy study of the interaction between hydrogen and different microstructural constituents in lab cast Fe-C alloys – D. Pérez Escobar, T. Depover, E. Wallaert, L. Duprez, M. Verhaege, K. Verbeken – Corrosion Science, Vol. 65 (2012) pp. 199-208
High-throughput analysis for preparation, processing and analysis of TiO2 coatings on steel by chemical solution deposition – Sake Van Gils, Marcos Cuadrado Gil, Isabel Van Driessche, Petra Lommens, Pieter Castelein, Klaartje De Buysser – Journal of Alloys And Compounds, Vol. 540 (2012) pp. 170–178
Texture generation and implications in TWIP steels – Lieven Bracke, Kim Verbeken, Leo Kestens, – Scripta Materialia, Vol. 66 (2012) pp. 1007–1011
Grossflächige plasmavorbehandlung und PECVD bei Atmosphärendruck mittels LARGE-Plasmaquelle – L. Kotte, G. Mäder, J. Roch, B. Leupolt, S. Kaskel, J. Wielant, T. Mertens, F. Gammel – Jahrbuch Oberflächentechnik, (2012) pp. 49-60
Corrosion of flame-assisted CVD silica-coated steel sheet – R. Hausbrand, , B. Bolado-Escudero, A. Dhont, J. Wielant – Corrosion Science, Vol. 61 (2012) pp. 28-34
Effect of Local Surface Microstructure and Composition on the Electrochemical Behavior of Hot Dip Aluminum-Silicon Coatings on Steel – I. Schoukens, I. De Graeve, J. De Strycker, and H. Terryn – Corrosion – The Journal of Science and Engineering – Nace, Vol. 68 (2012) pp. 982-993

Comparison of Hole Expansion Properties of Quench & Partitioned, Quench & Tempered and Austempered Steels – De Moor, E., Matlock, D., Speer, J., Föjer, C. et al. – SAE 2012 World Congress & Exhibition, Detroit, USA, April 2012
Extending the drive range of electric vehicles by higher efficiency and high power density traction motors, via a new generation of Electrical Steels – Lode Vandenbossche, Sigrid Jacobs, Dennis Van Hoecke, Bastien Weber, Emmanuel Attrazic – – Electric Vehicle Symposium (EVS26), Los Angeles CA, USA, Mei 2012
Understanding thermal warping and sagging in enameled steel parts through an integrated FE simulation – S. Cooreman, Ph. Gousselot, M. Leveaux, P. Pol, J. Antonissen – 22nd International Enamellers Congress, Köln, Germany, Juni 2012
A new generation of high performance electrical steels for automotive applications – Elke Leunis, Lode Vandenbossche, Dennis Van Hoecke, Sigrod Jacobs, Emmanuel Attrazic – WMM12: 5th International Conference Magnetism and Metallurgy , Gent, Belgium, Juni 2012
An innovative approach for the evaluation of iron losses in magnetic laminations, applied to the optimization of highly saturated electric motors – Lode Vandenbossche, Sigrid Jacobs, Raphael Andreux, Nicolas Labbe, Emmanuel Attrazic – INDUCTICA + CWIEME 2012, Berlin, Germany, Juni 2012
Effect of chloride and sulfate on zinc corrosion investigated by a scanning flow cell system with dynamic electrolyte change – Claudius A. Laska, Sebastian O. Klemm, Karl J. J. Mayrhofer, Myriam Madani, Joost De Strycker – EUROCORR 2012, Istanbul, Turkey, September 2012
Evaluation of Hydrogen Trapping in Iron-Based Alloys by Thermal Desorption Spectroscopy – D. Perez Escobar, M. Verhaege, L. Duprez, K. Verbeken – – 2012 International Hydrogen Conference , Moran, September 2012
Evaluation of the effect of in-situ hydrogen charging on the mechanical properties of iron-based alloys – T. DEPOVER, E. WALLAERT, Z. ZERMOUT, K. VERBEKEN – – 2012 International Hydrogen Conference , Moran, September 2012
TDS evaluation of the hydrogen trapping capacity of NbC precipitates – E. Wallaert, T. Depover, B. pieters, M. A. Arafin, K. Verbeken – – 2012 International Hydrogen Conference , Moran, September 2012
On the influence of tempering on hydrogen permeation in a 34CrMo4 martensitic steel – L. Moli-Sanchez, F. Martin, E. Leunis, M. Wery and J. Chêne – – 2012 International Hydrogen Conference , Moran, September 2012
Comparison of the tensile behavior of a tempered 34CrMo4 steel exposed in situ to high pressure H2 gas or to cathodic H charging – L. Moli-Sanchez, F. Martin, E. Leunis, L. Briottet, P. Lemoine and J. Chêne – – 2012 International Hydrogen Conference , Moran, September 2012
Current findings from the SSC testing and their implementation for the trial production of casing pipe grade T95 – M. A. ARAFIN, M. JANOŠEC, J. BÁR, R. PACHLOPNÍK, Z. VAŠEK – New methods of damage and failure analysis of structural parts, Ostrava, Czech Republic, September 2012
Effects of rolling reduction schedule on microstructure and properties of pipeline steel grades – V. Carretero Olalla, N. Sánchez Mouriño, P. Thibaux, R. H. Petrov, L.A.I. Kestens – TMP 2012 – 4th Int. Conf. on Thermomechanical Processing of Steels , Sheffield, United Kingdom, September 2012
Mechanical anisotropy of hot rolled linepipe steel coil – N. Sánchez, D. Van Hoecke, M. Liebeherr – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
Characterization of X80 grade linepipe steel coil with 24 mm thickness – N. Sánchez, M. Liebeherr, N. Ilic – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
Dynamic Behaviour of high strength pipeline steel – F. Van den Abeele, J. Peirs, P. Verleysen, F. Oikonomides, J. Van Wittenberghe – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
Modelling of slant failure using small size specimen – P. Thibaux, J. Van Wittenberghe – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
Optimization and characterization of a quenching and partitioning heat treatment on a low carbon steel – D. De Knijf, R. Petrov, C. Föjer, L.A.I. Kestens – MS&T 2012, Pittsburgh, USA, Oktober 2012
Improved iron loss modelling approach for advanced electrical steels operating at high frequencies and high inductions in automotive machines – L. Vandenbossche, S. Jacobs, D. Van Hoecke, B. Weber, E. Leunis, E. Attrazic – EDPC – International Electric Drives Production Conference and Exhibition 2012, Nürnberg, Germany, Oktober 2012
Verbeteren van de vermoeiingssterkte van lassen in hogesterktestalen – C.H.J. Gerritsen, S. Vanrostenberghe, H. Ahmed and T. Baaten (BIL) – NIL-BIL Lassymposium 2012, Gorinchem, Netherlands, November 2012

Enhanced Failure Criteria for Composite Crack Arrestors – F. Van den Abeele and T. Skocovsky – Journal of Pipeline Engineering , Vol. Q1 (2011) pp. 57-69
Assessment of a low-cost protocol for an ab initio based prediction of the mixing enthalpy at elevated temperatures: The Fe-Mo system – Kurt Lejaeghere, Stefaan Cottenier, Serge Claessens, Michel Waroquier, Veronique van Speybroeck – Physical Review B, Vol. 83 (2011) pp. 184201
Effect of Carbon Modification of Particles on Their Incorporation Rate during Electrodeposition – Dimitri Soccol, Johan Martens, Serge Claessens and Jan Fransaer – Journal of Electrochemical Society, Vol. 158 (2011) pp. 515-523
Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys – Rajashekhara Shabadi, Roland Taillard, Bertrand Radiguet, Jeremie de Baerdemaeker and Elke Leunis – Solid State Phenomena, Vol. 172-174 (2011) pp. 297-302
Tackling the toughness of steel pipes produced by high frequency induction welding and heat-treatment – P. Yan, Ö.E. Güngör, P. Thibaux, M. Liebeherr, H.K.D.H. Bhadeshia – Materials Science And Engineering – A – Structural Materials, Vol. 528 (2011) pp. 8492-8499
S700MC/Grade 100 in heavy gauges: Industrialisation at ArcelorMittal Europe – L. Bracke, N. De Wispelaere, H. Ahmed, Ö. E. Güngör – Revue De Métallurgie, Vol. 108 (2011) pp. 323–330
Influence of the electrical steel grade on the performance of the direct-drive and single stage gearbox permanent-magnet machine for wind energy generation, based on an analytical model – Damian Kowal, Luc Dupré, Peter Sergeant, Lode Vandenbossche, Marc De Wulf – IEEE Transactions On Magnetics, Vol. 47(12) (2011) pp. 4781-4790
Weerstands- versus laserpuntlassen – C.H.J. Gerritsen, S. Daneshpour, M. Koçak and S. Riekehr – Lastechniek, (2011) pp. 18-22
Laserlassen S700MC. Invloed van voor- en nawarmen met inductie – Ö.E. Güngör, C.H.J. Gerritsen en J. Goudemez – Lastechniek, (2011) pp. 14-17
Identification of the post-necking hardening behaviour of sheet metal by comparison of the internal and external work in the necking zone – S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte, D. Debruyne – Journal Of Materials Processing Technology, Vol. 211 (3) (2011) pp. 545-552
Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA – S. Coppieters, S. Cooreman, P. Lava, H. Sol, P. Van Houtte, D. Debruyne – International Journal of Material Forming, Vol. 4 (4) (2011) pp. 429-440
Bulk Metallic Glasses (BMG): A competing or complementary technology to Metal Injection Moulding? – F. Van Camp and L. Oelbrandt – Powder Injection Moulding International, Vol. 5(3) (2011) pp. 78-82
Influence of Rolling Temperature and Cooling Rate on Microstructure and Properties of Pipeline Steel Grades – V. Carretero Olalla, R. H. Petrov, P. Thibaux, M. Liebeherr, P. Gurla, L. A.I. Kestens – Materials Science Forum, (2011) pp. Vols. 706-709 (2012)

Improving the value of steel through UV curable coatings – Ph. Legros – RTE Metal Coatings Seminar 2011 (OCAS), Zelzate, Belgium, Januari 2011
Identification of post-necking hardening behaviour of sheet metal – S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte, D. Debruyne – Photomechanics 2011 , Brussels, Belgium, Februari 2011
Design of Crack Arrestors for Ultra High Grade Gas Transmission Pipelines: Material Selection, Testing and Modelling – F. Van den Abeele and M. Di Biagio – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
Design of Crack Arrestors for Ultra High Grade Gas Transmission Pipelines: Simulation of Crack Initiation, Propagation and Arrest – F. Van den Abeele, M. Di Biago and L. Amlung – Confererence on Sustainable Construction and Design, Gent, Belgium, Februari 2011
Stability of Offshore Structures in Shallow Water Depths – F. Van den Abeele and J. Vande Voorde – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
Non Destructive Testing Techniques for Risk Based Inspection – F. Van den Abeele and P. Goes – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
Influence of Design Features on the Structural Integrity of Threaded Pipe Connections – T. Galle, W. De Waele, P. De Baets, J. Van Wittenberghe, F. Van den Abeele and S. Jakani – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
Stability of Offshore Pipelines in Close Proximity to the Seabed – F. Van den Abeele and J. Vande Voorde – Pipeline Technology Conference , Hannover, Germany, April 2011
Relation between electrical steel grade, active mass and efficiency in direct-drive permanent magnet synchronous generator for large scale wind energy application – Damian Kowal, Peter Sergeant, Luc Dupré, Lode Vandenbossche – IEEE International Magnetics Conference—Intermag 2011, Taipei, Taiwan, Province Of China, April 2011
An evaluation of novel MIG/MAG and TIG variants for welding of thin section steels – C.H.J. Gerritsen and T. Baaten – Joining of Materials, JOM-16, Tisvildeleje, Denmark, Mei 2011
Advanced electrical steel characterisation of electrical machines subjected to high levels of mechanical stress: automotive traction – Dennis Van Hoecke, Sigrid Jacobs, Bastien Weber, Emmanuel Attrazic – Inductica 2011, Berlin, Germany, Mei 2011
XRF versus GDOES in steel industry applications – M. Madani – CETAS 2011 – 8th Int. Workshop on Progress in Analytical Chemistry & Materials Characterisation in the Steel and Metal Industries, Luxembourg, Luxembourg, Mei 2011
Coupled Eulerian Lagrangian Approach to Model Offshore Platform Movements in Strong Tidal Flows – F. Van den Abeele and J. Vande Voorde – OMAE 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (June 19-24, 2011), Rotterdam, Netherlands, Juni 2011
Relationship between Charpy V-notch impact value and fracture mechanics toughness – P. Thibaux and F. Van den Abeele – The 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), Rotterdam, Netherlands, Juni 2011
Hydrogen Transport in 34CrMo4 Martensitic Steels: Influence of Microstructural Defects on H Diffusion – L. MOLI-SANCHEZ, F. MARTIN, E. LEUNIS, J. CHENE – DIMAT2011 – International Conference on Diffusion in Materials, Dijon, France, Juli 2011
Etude par thermodesorption (TDS) du piègeage de l’hydrogène dans des aciers martensitiques revêtus – MOLI-SANCHEZ Laura, CHENE Jacques, LEUNIS Elke, MARTIN Frantz, MARCHETTI Loïc, WERY Martine – Journées <Jeunes Chercheurs 2011>, Lyon, France, Juli 2011
The Surface Chemical Characteristics of Galvanised Steel Substrates – S. Ng, M-L Abel, J.F. Watts and J. Wielant – ECASIA 2011 [European Conference on Applications of Surface and Interface Analysis ], Cardiff, United Kingdom, September 2011
Hydrogen behaviour in 34CrMo4 martensitic steels: influence of microstructural defects on H trapping and embrittlement – Laura Moli-Sanchez, Frantz Martin, Elke Leunis, Jacques Chêne, Martine Wery – WHTC2011 – 4th World Hydrogen Technologies Convention, Glasgow, United Kingdom, September 2011
Temperature distribution for several material grades in direct-drive PM synchronous generators for 5 MW wind turbines – Damian Kowal, Peter Sergeant, Luc Dupré, Lode Vandenbossche – 20th Soft Magnetic Materials Conference, Kos, Greece, September 2011
Study of the hydrogen traps in a high strength TRIP steel by Thermal Desorption Spectroscopy, X-ray Diffraction and Differential Scanning Calorimetry – D. Pérez Escobar, M. Verhaege, L. Duprez, K. Verbeken – Steely Hydrogen Conference, Gent, Belgium, September 2011
H-embrittlement mechanisms in 34CrMo4 martensitic steels – L. Moli-Sanchez, J. Chêne, F. Martin, E. Leunis – Steely Hydrogen Conference, Gent, Belgium, September 2011
Constant Load Testing with In-Situ hydrogen Charging on Martensitic Ultra High Strength Steel – L. Duprez, M. Arafin, F. Van den Abeele, N. Bernier, D. B. Rosado, J. De Mey, V. Van Speybroeck – Steely Hydrogen Conference, Gent, Belgium, September 2011
In-situ mechanical evaluation of hydrogen embrittlement for TRIP, FB, DP and HSLA steels – T. Depover, D. Pérez Escobar, E. Wallaert, M. Verhaege, L. Duprez, K. Verbeken – Steely Hydrogen Conference, Gent, Belgium, September 2011
Factors Affecting the Toughness of High Frequency Induction Welded Pipes – Ö. E. Güngör, M. Liebeherr, D. Quidort – AWST 2011 – IIW International Congress on Advances in Welding Science & Technology , Antalya, Turkey, Oktober 2011
New Electrical Steels for high performance traction motors – Lode Vandenbossche, Sigrid Jacobs, Dennis Van Hoecke, Bastien Weber, Emmanuel – EEVC October Brussels 26-28, 2011, Brussels, Belgium, October 2011
Investigation of fatigue improvement techniques for welds – H. Ahmed, C.H.J. Gerritsen & T. Baaten – BIL/NIL welding symposium, Gent, Belgium, November 2011
Development and weldability assessment of heavy gauge X80 line pipe steel for spiral welded pipe – Martin Liebeherr, Özlem Esma Güngör, David Quidort, Denis Lèbre, Nenad Ilić – CBMM Welding of High Strength Pipeline Steels, International Seminar 28-30 November 2011, Araxa, Brazil, , Brazil, November 2011

FINOCAS Group publishes its activity report 2022-2023

New research could cut the cost of wind turbine fabrication.

SteelyHydrogen 2025

Industrial Asset Reliability

Interested in joining our team?