• Elke Leunis, Melanie Gauvin – Can carbides resist during nitriding? – 2018/04/12 – Friedrichshafen, Germany – European Conference on heat treatment: Nitriding and Nitrocarburizing (2018)
  • Marc Leveaux, Laura Moli Sanchez, Zinedine Zermout, Irati Lizarraga Ferro – Influence of the enamelling process on hydrogen permeation, comparison between permeation & high temperature charging – 2018/05/28 – chicago, USA – 24th intenrnational enamelling congress, (2018) pp. 129-136
  • S. Cooreman, P. Thibaux, F. Tankoua, J. Crépin, A.-F. Gourgues-Lorenzon – Brittle out-of-plane cracking in pipeline steels
    2018/04/10 – Gent, Belgium – Technology for Future and Aging Pipelines 2018 10-12 April 2018 Gent (2018)
  • S. Cooreman, P. Thibaux, M. Liebeherr – Prediction of mechanical properties on large diameter welded pipes through advanced constitutive modelling 2018/07/30 – Tokio, Japan – NUMISHEET 2018 (2018)
  • S. Cooreman, D. Van Hoecke, M. Liebeherr, P. Thibaux, H. Luccioni  – Advanced constitutive model for the accurate evaluation of the structural performance of welded pipes in offshore applications – 2018/09/24 – Calgary, Canada – 12th International Pipeline Conference (IPC 2018) (2018
  • P. Thibaux, E Van Pottelberg – Development of a welding sequence optimised for the fatigue resistance of tubular joints with a novel representative weld sample – 2018/06/17 – Madrid, Spain – OMAE : 37th International Conference on Ocean, Offshore & Arctic Engineering (2018)
  • Krista Van den Bergh, Zinedine Zermout, Dennis Van Hoecke, Lode Duprez, Joost De Strycker – Towards a better understanding of hydrogen embrittlement of steel in sour service conditions 2018/09/09 – Krakow, Poland – Eurocorr 2018 (2018)
  • Krista Van den Bergh, Zinedine Zermout, Patrick Goes – Towards a better understanding of hydrogen embrittlement testing of steel in sour service conditions by coupling H diffusion to fracture mechanics – 2018/05/29 – Ghent, Belgium – SteelyHydrogen 2018 29-31 May 2018 Ghent (2018)
  • Debora Rosseel, David Mercier, Mélanie Gauvin, Franck Nozahic, Krista van den Bergh – Quantitative mapping of nanoscale mechanical properties of Zn-Al coating on steel by nanoindentation – 2018/09/11 – Liège, Belgium – Indentation 2018 (2018)
  • Monika Lukaczynska, Krista Van den Bergh, Joost De Strycker, Herman Terryn, Jon Ustarroz – Influence of Applied Potential, Water Content and Forced Convection on the Electrodeposition of Ni Films on Steel from Choline Chloride Based Deep Eutectic Solvents –
    2018/05/13 – Seattle, USA – 233rd ECS MEETING (2018)
  • Monika Lukaczynska, Krista Van den Bergh, Joost De Strycker, Herman Terryn, Jon Ustarroz – Electrochemical deposition of Nickel films from choline chloride based Deep Eutectic Solvents – 2018/02/21 – Blankenberge, Belgium – ChemCYS2018 (2018)
  • Krista Van den Bergh, Kurt De Sloover, Joachim Noens, Dennis Van Hoecke, Joost De Strycker – Hydrogen uptake by high-strength steels during electrodeposition process – 2018/05/29 – Ghent, Belgium – SteelyHydrogen 2018 29-31 May 2018 Ghent (2018)
  • M. Liebeherr, O.E. Gungor, N. Sanchez, H. Luccioni, N. Ilic – Recommendations for submerged arc spiral welding with optimised CTOD properties – 2018/09/24 – Calgary, Canada – 12th International Pipeline Conference (IPC 2018) (2018)
  • Reza H. Talemi, Jie Zhang, Stijn Hertelé, Wim De Waele – Fretting Fatigue Fracture in Lug Joints Made of High Strength Steel – 2018/05/27 – Poitiers, France – 12th International Fatigue Congress (2018)
  • John Vande Voorde and Jeroen Van Wittenberghe – Prediction of the Leakage Threshold for Hertzian Contact Seals: A Cellular Automata Model – 2018/07/15 – Prague, Czech Republic – PVP2018 (2018)
  • Jeroen Van Wittenberghe and John Vande Voorde – Prediction of the Leakage Threshold for Hertzian Contact Seals: An Experimental Approach – 2018/07/15 – Prague, Czech Republic – PVP2018 (2018)
  • John Vande Voorde, Filip Van den Abeele, Steven Cooreman – Optimization of the Structural Performance for Corrugated Blast Panels on Offshore Platforms – 2018/06/17 – Madrid, Spain – OMAE : 37th International Conference on Ocean, Offshore & Arctic Engineering (2018)
  • Reza Hojjati Talemi, Haroun Mahgerefteh, Sergey Martynov, Solomon Brown – Three-dimensional simulation of dynamic ductile crack propagation in steel pipeline using coupled fluid-structure modelling – 2018/09/19 – Verona, Italy – The 6th International Conference on Crack Paths (CP 2018) (2018)
  • Reza H. Talemi, Antônio de Souza Braga Neto, Annick Willems, Negar Gilani, Quang Tien Ngo – Cleavage fracture assessment of cold charged steel slabs using experimental and numerical approaches – 2018/08/26 – Belgrade, Serbia , – 22nd European Conference on Fracture – ECF22 (2018)
  • Jeroen Van Wittenberghe, Philippe Thibaux – Innovative resonant bending test set-up for fatigue testing of pipelines with directional loading control – 2018/04/10 – Gent, Belgium – Technology for Future and Aging Pipelines 2018 10-12 April 2018 Gent (2018)
  • Jan Rens, Sigrid Jacobs, Emmanual Attrazic – Improved loss modelling of electrical traction motors by including magnetic skin effect
    2018/11/07 – Nottingham, United Kingdom – ESARS-ITEC: Electrical systems for aircraft, railway, ship propulsion and road vehicles and international transportation electrification conference (2018)
  • Jan Rens, Sigrid Jacobs, Lode Vandenbossche, Emmanuel Attrazic – Improved core loss modelling of electrical traction motors through simulation of skin effect in laminations 2018/09/30 – Kobe, Japan – Electrical Vehicle Symposium EVS31 (2018)
  • Lode Vandenbossche, Sigrid Jacobs, Vinicius Araujo Rabello Landeira, Emmanuel Attrazic – Iron loss measurements of non-oriented electrical steels at elevated magnetic polarization: comparison of calorimetric and field-metric methods – 2018/09/23 – Portland, USA – ECCE (IEEE Energy Conversion Congress & Exposition) (2018) pp. 1-5
  • P. Wechsuwanmanee, J. Lian, J. Sukumaran, Á. Kalácska, H. Ben Hamouda, P. De Baets, S. Münstermann – Finite Element Model in Abrasion Analysis for Single-Asperity Scratch Test – 2018/06/09 – Gent, Belgium – Fracture Fatigue and Wear 2018 (FFW) (2018)

  • P. Rodriguez-Calvillo, E. Leunis, T. Van De Putte, S. Jacobs, O. Zacek, W. Saikaly – Influence of initial heating during final high temperature annealing on the offset of primary and secondary recrystallization in Cu-bearing grain oriented electrical steels – AIP Advances, Vol 8 2018
  • C. Garcia Mateo, L. Bracke, M. Somani, A. Latz, D.A. Porter, F.G. Caballero – Harder, better, faster, stronger  – Image And Vision Computing, Vol. 218 (2018) pp. 94-96
  • J. A. Muñoz, O. F. Higuera,A. Hernández Expósito, A. Boulaajaj, R. E. Bolmaro, F. D. Dumitru, P. Rodriguez-Calvillo, A. Moreira Jorge Jr, J. M. Cabrera – Thermal stability of ARMCO iron processed by ECAP  – International Journal of Advanced Manufacturing Technology , Vol. 98 (2018) pp. 2917-2932
  • F. Tankoua, J. Crépin, P. Thibaux, S. Cooreman, A.-F. Gourgues-Lorenzon – Quantification and microstructural origin of the anisotropic nature of the sensitivity to brittle cleavage fracture for hot-rolled pipeline steels  – International Journal of Fracture, Vol. 212 (2018) pp. 143–166
  • Sam De Waele, Kurt Lejaeghere, Elke Leunis, Lode Duprez, Stefaan Cottenier – A first-principles reassessment of the Fe-N phase diagram in the low-nitrogen limit Journal of Alloys And Compounds – Vol. 775 (2018) pp. 758-768
  • J.C.R. Pereira, Jeroen Van Wittenberghe, A.M.P. de Jesus, Philippe Thibaux, J.A.F.O. Correia, A.A. Fernandes – Damage behaviour of full-scale straight pipes under extreme cyclic bending conditions  – Journal of Constructional Steel Research, Vol. 143 (2018) pp. 97-109
  • Kangying Zhu, Hui Shi, Hao Chen, Coralie Jung – Effect of Al on martensite tempering: comparison with Si – Journal of Materials Science
    Volume 53, Issue 9, pp 6951–6967
  • R. Zhang, W. Zheng, X. Veys, G. Huyberechts, H. Springer, M. Selleby – Prediction of Martensite Start Temperature for Lightweight Fe-Mn-Al-C Steels – Journal of Phase Equilibria And Diffusion, Vol. 39 Issue 5 (2018) pp. 476-489
  • B. Lemmens, H. Springer, M. Peeters, I. De Graeve, J. De Strycker, D. Raabe, K. Verbeken – Deformation induced degradation of hot-dip aluminized steel – Materials Science And Engineering – A – Structural Materials, Vol. A 710 (2018) pp. 385-391

Publication Title Author(s) Conference

The behaviour of austenite during bar rolling 

 

 Elke Leunis, Kris Hertschap, Nuria Sanchez Mourino  2017/03/15 – Freiberg, Germany – MEFORM 2017 – “Bar and wire rolling”

Form removal aspects on the waviness parameters for steel sheet in automotive applications …

 

 Vermeulen Michel, Balabane Mikhael and Mallé Céline 2017/01/30 – Chemnitz, Germany – XIV. International Colloquium on Surfaces Chemnitz 30 Jan- February 1, 2017

Finite element simulation of cleavage fracture propagation in pipeline steels using XFEM-cohesive segment technique

 

 Reza Hojjati Talemi 2017/06/18 – Rhodes, Greece – 14th International Conference on Fracture

Numerical study on influence of non-proportional stressing on fretting fatigue life assessment

 

 Reza Hojjati Talemi 2017/07/03 – Cambridge, United Kingdom – Fatigue 2017 

Ductile Tearing Of Welds In Pipe Submitted To Cyclic Loading

 

 Philippe Thibaux, Steven Cooreman, Antonio Carlucci, Johan Vekeman, Koen Van Minnebruggen, Wim De Waele 2017/06/25 – Trondheim, Norway – OMAE

On Complete Solutions for the Problem of Diffuse Necking in Sheet Metal

 

 Sam Coppieters, J.-H. Kim, Kristof Denys, Steven Cooreman, Dimitri Debruyne 2017/09/17 – Cambridge, United Kingdom –  International Conference on the Technology of Plasticity – ICTP 2017

Dynamic fracture behavior of high strength pipeline steel

 

 Sarath Chandran, Patricia Verleysen, Junhe Lian, Wenqi Liu, Steven Cooreman, Sebastian Münstermann 2017/09/12 – Trondheim, Norway – Dymat 2017 – Dynamic fracture of ductile materials

Surface contaminants and their contribution to spangle variation on Galvalume sheet

 

 A. Dhont, F. Horzenbergher 2017/09/18 – Toronto, Canada – Interzac

The production of uniform spangle Galvalume sheet

 

 F. Horzenberger, A. Dhont 2017/09/18 – Toronto, Canada – Interzac

Iron Loss modelling of a PMSM Traction Motor, including magnetic degradation due to lamination laser cutting

 

 Lode Vandenbossche, Sven Luthardt, Sigrid Jacobs, Stefan Schmitz, Emmanuel Attrazic 2017/10/09 – Stuttgart, Germany – EVS – 30th International Electric Vehicle Symposium & Exhibition

Numerical and Experimental Evaluation of Magnetostriction and Magnetic Forces on Transformer Stacks and Joints for the Assessment of Core Vibrations

 

 Jan Rens, Sigrid Jacobs, Maarten Van Poucke, Emmanuel Attrazic 2017/10/01 – Cincinnati, USA – IEEE – Energy Conversion Congress and Expo

Thermo-metallurgical coupled simulation for the analysis of microstructure in welds

 

 J. Ni, J. Vande Voorde, J. Antonissen, M. Abdel Wahab 2017/05/17 – Metz, France – International Congress on Welding, Additive Manufacturing and Non Destructive Testing 17-19 May 2017 Metz

Corrosion Modelling Tool And High Throughput Approach Facilitates Smart Metallic Coating Design 

 

 K. Van den Bergh, J. De Strycker, C. Allely, O. Dolgikh, H. Simillion, S. Lamaka, A. Bastos, B. Van Den Bossche, J. Deconinck 2017/11/12 – Tokyo, Japan – Galvatech 2017

New insights in intermetallic phases and interfaces between Al-alloys and steel and possible impact on in-use properties

 

 Babs Lemmens, Hauke Springer, Beril Corlu, Joost De Strycker, Iris De Graeve, Kim Verbeken 2017/11/12 – Tokyo, Japan – Galvatech 2017

On the anti-corrosion performance of Zn-Al-Mg substrates under natural exposure

 

 B. Corlu, C. Dieu, C. Allely, T. Machado Amorim, J. De Strycker 2017/11/12 – Tokyo, Japan – Galvatech 2017

SPECIES – Speciation of Chromium in Ionic Liquids as alternative Electrodeposition Solvents

 

 Tim Verdonck, Philippe Verpoort, Rik van Deun, Kristof Van Hecke 2016/03/16 – Blankenberge, Belgium – Chemistry Conference for Young Scientists

EVS paper: effect of stator segmentation and manufacturing degradation on performance of IPM, using iCARe

 

 Jan Rens, Sigrid Jacobs, Lode Vandenbossche 2016/06/19 – Montréal, Canada – Electrical Vehicle Symposium (EVS29)

Optimisation And Welding Pre-Qualification Of Heavy Plate For Offshore Applications

 

 C.H.J. Gerritsen, X. Veys, M. Liebeherr, J.M. Vigil 2016/05/17 – Gijón, Spain – Interjoin III

Effect of stator segmentation and manufacturing degradation on the perfomance of IPM machines, using iCARe electrical steels

 

 Jan Rens, Sigrid Jacobs, Lode Vandenbossche, Emmanual Attrazic 2016/06/01 – Seville, Spain – 11th International Conference on Multiaxial Fatigue & Fracture (ICMFF11)

Comparative Spectroscopic Study of Cr(III) in Ionic Liquids and Water as Electrodeposition Solvent

 

 Tim Verdonck, Philippe Verpoort, Rik Van Deun, Kristof Van Hecke 2016/07/03 – Vienna, Austria – EUCHEM on moltens salts and ionic liquids

Ultra-low-cycle fatigue behaviour of full-scale straight pipes under alternating bending

 

 J.C.R. Pereira, J. Van Wittenberghe, A. Jesus, P. Thibault, A.A. Fernandes 2016/07/17 – Vancouver, Canada – PVP2016 – International Conference on Pressure Vessels and Piping

Pipe Material Weldability for sour service conditions

 

 Philippe Thibaux, Vincent Gaffard 2016/06/26 – Rhodos, Greece – ISOPE 2016 International Society of Offshore and Polar Engineers

High Peak Strain on Pipeline Material During Reel-lay: Acceptable or not?

 

 Erwan Karjadi, Henk Smienk, Philippe Thibaux, Olav Aamlid 2016/06/26 – Rhodos, Greece – ISOPE 2016 International Society of Offshore and Polar Engineers

Experimental and Numerical Study on the Evolution of Mechanical Properties During Spiral Pipe Forming

 

 S. Cooreman, D. van Hoecke, M. Liebeherr, P. Thibaux, M. Yamaguti Enderlin 2016/09/26 – Calgary, Canada – IPC2016 – International Pipeline Conference & Exposition

Effects of High Strain Rates on Ductile Slant Fracture Behaviour of Pipeline Steel: Experiments and Modelling

 

 R. Hojjati, M. Steinhoff, S. Cooreman, F. Van den Abeele, P. Verleysen 2016/09/26 – Calgary, Canada – IPC2016 – International Pipeline Conference & Exposition

Identification of 3D Anisotropic Yield Surface of X70 Pipeline Steel Using a Multi-DIC Setup

 

 K. Denys, S. Coppieters, R. Van Hecke, S. Cooreman, D. Debruyne 2016/09/26 – Calgary, Canada – IPC2016 – International Pipeline Conference & Exposition

Steels for mobile cranes – Development of Amstrong® Ultra 900MCL and 960MCL with a focus on mechanical properties, formability and weldability

 

 C.H.J. Gerritsen & L. Bracke 2016/11/22 – Rostock, Germany – 9th Rostocker Welding Days

Effect of submerged arc welding filler wire selection on weld metal toughness of high & low Nb alloyed linepipe steel

 

 Ö.E. Güngör, M. Liebeherr 2016/11/02 – Gorinchem, Netherlands – NIL/BIL Welding symposium

Improved Calculation of Iron Losses in Large Salient-Pole Synchronous Hydro-Generators

 

 Lode Vandenbossche, Thomas Lugand, Sigrid Jacobs, Alexander Schwery 2016/11/30 – Nürnberg, Germany – EDPC – International Electric Drives Production Conference

Electrodeposition of Ni coatings on low carbon steel from choline chloride based Deep Eutectic Solvents

 

 Monika Lukaczynska, Jon Ustarroz, Krista Van den Bergh, Joost De Strycker, Herman Terryn 2016/08/21 – Den Haag, Netherlands – Electrochemistry: from Sense to Sustainability (ISE)

Low carbon steel electroplated with Ni coating from choline chloride based Deep Eutectic Solvents

 

 Monika Lukaczynska, El Amine Mernissi Cherigui, Jon Ustarroz, Krista Van den Bergh, Joost De Strycker, Herman Terryn 2016/10/24 – Blankenberge, Belgium – Chemical Research in Flanders Symposium – CRF 

Trivalent hard chrome plating using ionic liquid technology

 

 Rob van de Coevering 2016/10/04 – ‘s Hertogenbosch, Netherlands – Surface 2016

A density-functional theory investigation of Fe4N and Fe16N2 precipitates in an Fe-N solid solution

 

 Sam De Waele, Kurt Lejaeghere, Elke Leunis, Roger Hubert, Lode Duprez, Stefaan Cottenier 2016/10/03 – Dusseldorf, Germany – Ab initio Description of Iron and Steel (ADIS2016)

Effects of cutting and annealing of amorphous materials for high speed permanent magnet machines

 

 Jonas Celie, Marnix Stie, Jan Rens, Peter Sergeant 2016/09/04 – Lausanne, Switzerland – ICEM2016

Publication Title Author(s) Journal Reference

Transferring Nanoscale Bainite Concept to Lower C Contents: A Perspective

 

 Carlos Garcia-Mateo, Georg Paul, Mahesh C. Somani, David A. Porter, Lieven Bracke, Andreas Latz, Carlos Garcia De Andres and Francisca G. Caballero Metals Vol. 7 (2017) pp. 159

Numerical measures of non-proportionality degree in incomplete contact subjected to fretting fatigue loading

 

 Reza Hojjati Talemi Theoretical and Applied Fracture Mechanics Vol. 90 (2017) pp. 33-42

Experimental and numerical study on effect of forming process on low cycle fatigue behavior of high strength steel

 

 Reza Hojjati Talemi, S. Chhith & W. De Waele Fatigue and Fracture of Engineering Materials and Structure Vol. 40 (2017) pp. 2050-67

Alternative method for the identification of the strain hardening behaviour along the rolling direction of coil

 

 Kristof Denys, Sam Coppieters, Steven Cooreman, Dimitri Debruyne Strain  (2017) pp. DOI: 10.1111/str.12231

Advanced Plasticity Modeling for Ultra-Low-Cycle-Fatigue Simulation of Steel Pipe

 

 Rongting Li, Philip Eyckens, Daxin E, Jerzy Gawad, Maarten Van Poucke, Steven Cooreman, Albert Van Bael Metals Vol. 7(4) (2017) pp. 140

Finite element simulation of the dynamic behaviour of deep drawn

 

 F. Greco, E. Deckers, J. Stroobants, S. Van Poppel, K. Linck, W. Desmet Finite Elements In Analysis and Design Vol. 138 (2017) pp. 12-20

Development of Direct Quenched Hot Rolled Martensitic Strip Steels

 

 Lieven Bracke, Dorien De Knijf, Christoph Gerritsen, Reza Hojjati Talemi Metals Vol. 7 (2017) pp. 326-336

Quantitative Determination of Carbon Concentration Profiles by Glow Discharge Optical Emission Spectroscopy Applied for the Study of Decarburization

 

 Alvarenga, H.D.; Van Steenberge, N.; Xhoffer, C.; Steegstra, P.; Sietsma, J.; Terryn, H. Surface and Interface Analysis Vol. 48 (2016) pp. 73-81

Structure of graphite precipitates in cast iron

 

 K.Theuwissen, J. Lacaze, L. Laffont Carbon Vol. 96 (2016) pp. 1120-1128

A Multiple-Action Self-Healing Coating

 

 Alexander Lutz,Otto van den Berg, Jan Wielant, Iris De Graeve and Herman Terryn  Frontiers in Materials  (2016) pp. DOI: https://doi.org/10.3389/fmats.2015.00073

Finite element simulation of dynamic brittle fracture in pipeline steel: A XFEM-based cohesive zone approach

 

 Reza Hojjati-Talemi, Steven Cooreman, Dennis van Hoecke Proceedings of The Institution of Mechanical Engineers Part L – Journal of Materials-Design and Applications  (2016) pp. DOI: https://doi.org/10.1177/1464420715627379 

A hybrid fluid-structure interaction modelling of dynamic brittle fracture in pipeline steel transporting CO2 streams

 

 Reza H. Talemi, Solomon Brownb,, Sergey Martynov, Haroun Mahgerefteh International Journal of Greenhouse Gas Control Vol. 54 (2016) pp. 702-715

Techno-economic assessment of CO2 quality effect on its storage and transport: CO2QUEST: An overview of aims, objectives and main findings

 

 Richard T.J. Porter, Reza H. Talemi and 38 others International Journal of Greenhouse Gas Control Vol. 54 (2016) pp. 662-681

An approach to microstructure quantification interms of impact properties of HSLA pipeline steels

 

 Alexey Gervasyev, Victor Carretero, Jurij Sidor, Nuria Sanchez, Leo A.I. Kestens, Roumen H. Petrov Materials Science and Engineering – A – Structural Materials Vol. 677 (2016) pp. 163-170

Investigations on the fretting fatigue failure mechanism of bolted joints in high strength steel subjected to different levels of pre-tension

 

 Carlos Jiménez-Peña, Reza H. Talemi, Barbara Rossi, Dimitri Debruyne Tribology International Vol. 108 (2016) pp. 128-140

Atom probe tomography of intermetallic phases and interfaces formed in dissimilar joining between Al alloys and steel

 

 B. Lemmens, H. Springer, M.J. Duartec, I. De Graeve, J. De Strycker, D. Raabe, K. Verbeken Materials Characterization Vol. 120 (2016) pp. 268-272

Corrosie modelling tool en high throughput aanpak accelereren het slimme design en testen van nieuwe metallische coatings

 

 Krista Van den Bergh, Joost De Strycker, Rob van de Coevering VOM Info  Vol. 9 (2016) pp. 23-26

  • Fretting fatigue failure mechanism of automotive shock absorber valve –  Reza Hojjati-Talemi, Ali Zahedi, Patrick De Baets – International Journal Of Fatigue, Vol. 73 (2015) pp. 58-65 2015
  • Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels – Irene De Diego-Calderón, Dorien De Knijf, Jon M. Molina-Aldareguia, Ilchat Sabirov, Cecilia Föjer, Roumen Petrov –  Revista De Metalurgia Vol. Jan-March (2015) pp. 1-12 2015
  • Effect of hydrogen carbonate and chloride on zinc corrosion investigated by a scanning flow cell system – Claudius A. Laska, Michael Auinger, P.Ulrich Biedermann, Danish Iqbal, Nadine Laska, Joost De Strycker, Karl J.J. Mayrhofer –  Electrochimica Acta Vol. 159 (2015) pp. 198-209 2015
  • A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels – Xiaojun Xu, Sybrand van der Zwaag, Wei Xu –  Wear,  Vol. 322-323 (2015) pp. 51-60 2015
  • The influence of ultra-fast annealing prior to quenching and partitioning on the microstructure and mechanical properties – Dorien DeKnijf, Athina Puype, Cecilia Föjer, Roumen Petrov – Materials Science And Engineering – A – Structural Materials Vol. 627 (2015) pp. 182–190 2015
  • Influence of Carbide Morphology and Microstructure on the Kinetics of Superficial Decarburization of C-Mn Steels – Alvarenga, H.D.; Van De Putte, T.; Van Steenberge, N.; Sietsma, J.; Terryn, H. – Metallurgical And Materials Transactions A Vol. 46 (2015) pp. 123-133 2015
  • Comparison of Iron Loss Models for Electrical Machines With Different Frequency Domain and Time Domain Methods for Excess Loss Prediction – D. Kowal, P. Sergeant, L. Dupre, L. Vandenbossche –  IEEE Transactions On Magnetics Vol. 51(1) (2015) pp. 1-10 2015
  • Novel use of a micro-optode in overcoming the negative influence of the amperometric micro-probe on localized corrosion measurements – M.G. Taryba, K. Van den Bergh, J. De Strycker, O. Dolgikh, J. Deconinck, S.V. Lamaka – Corrosion Science Vol. 95 (2015) pp. 1-5 2015
  • In situ austenite–martensite interface mobility study during annealing – Dorien De Knijf, Maria J. Santofimia, Hui Shi, Vitaliy Bliznuk, Cecilia Fojer –  Acta Materialia Vol. 9 (2015) pp. 161-168 2015
  • Evaluation of a numerical model for tapered threaded connections subjected to combined loading using enhanced experimental measurement techniques – Timothy Galle, Wim De Waele, Jeroen Van Wittenberghe, Patrick De Baets – Journal of Strain Analysis For Engineering Design Vol. 50 (2015) pp. 561-570 2015
  • Effect of the Cr Content and Coiling Temperature on the Properties  – Lieven Bracke, Wei Xu –  ISIJ International Vol. 5 (2015) pp. 2206-2211 2015
  • Effects of specimen geometry and anisotropic material response on the tensile strain capacity of flawed spiral welded pipes – Koen Van Minnebruggen, Stijn Hertelé, Philippe Thibaux, Wim De Waele – Engineering Fracture Mechanics Vol. 148 (2015) pp. 350-362 2015