• Enhanced Failure Criteria for Composite Crack Arrestors – F. Van den Abeele and T. Skocovsky – Journal of Pipeline Engineering , Vol. Q1 (2011) pp. 57-69
  • Assessment of a low-cost protocol for an ab initio based prediction of the mixing enthalpy at elevated temperatures: The Fe-Mo system – Kurt Lejaeghere, Stefaan Cottenier, Serge Claessens, Michel Waroquier, Veronique van Speybroeck – Physical Review B, Vol. 83 (2011) pp. 184201
  • Effect of Carbon Modification of Particles on Their Incorporation Rate during Electrodeposition – Dimitri Soccol, Johan Martens, Serge Claessens and Jan Fransaer – Journal of Electrochemical Society, Vol. 158 (2011) pp. 515-523
  • Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys – Rajashekhara Shabadi, Roland Taillard, Bertrand Radiguet, Jeremie de Baerdemaeker and Elke Leunis – Solid State Phenomena, Vol. 172-174 (2011) pp. 297-302
  • Tackling the toughness of steel pipes produced by high frequency induction welding and heat-treatment – P. Yan, Ö.E. Güngör, P. Thibaux, M. Liebeherr, H.K.D.H. Bhadeshia – Materials Science And Engineering – A – Structural Materials, Vol. 528 (2011) pp. 8492-8499
  • S700MC/Grade 100 in heavy gauges: Industrialisation at ArcelorMittal Europe – L. Bracke, N. De Wispelaere, H. Ahmed, Ö. E. Güngör – Revue De Métallurgie, Vol. 108 (2011) pp. 323–330
  • Influence of the electrical steel grade on the performance of the direct-drive and single stage gearbox permanent-magnet machine for wind energy generation, based on an analytical model – Damian Kowal, Luc Dupré, Peter Sergeant, Lode Vandenbossche, Marc De Wulf – IEEE Transactions On Magnetics, Vol. 47(12) (2011) pp. 4781-4790
  • Weerstands- versus laserpuntlassen – C.H.J. Gerritsen, S. Daneshpour, M. Koçak and S. Riekehr – Lastechniek, (2011) pp. 18-22
  • Laserlassen S700MC. Invloed van voor- en nawarmen met inductie – Ö.E. Güngör, C.H.J. Gerritsen en J. Goudemez – Lastechniek, (2011) pp. 14-17
  • Identification of the post-necking hardening behaviour of sheet metal by comparison of the internal and external work in the necking zone – S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte, D. Debruyne – Journal Of Materials Processing Technology, Vol. 211 (3) (2011) pp. 545-552
  • Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA – S. Coppieters, S. Cooreman, P. Lava, H. Sol, P. Van Houtte, D. Debruyne – International Journal of Material Forming, Vol. 4 (4) (2011) pp. 429-440
  • Bulk Metallic Glasses (BMG): A competing or complementary technology to Metal Injection Moulding? – F. Van Camp and L. Oelbrandt – Powder Injection Moulding International, Vol. 5(3) (2011) pp. 78-82
  • Influence of Rolling Temperature and Cooling Rate on Microstructure and Properties of Pipeline Steel Grades – V. Carretero Olalla, R. H. Petrov, P. Thibaux, M. Liebeherr, P. Gurla, L. A.I. Kestens – Materials Science Forum, (2011) pp. Vols. 706-709 (2012)

  • Improving the value of steel through UV curable coatings – Ph. Legros – RTE Metal Coatings Seminar 2011 (OCAS), Zelzate, Belgium, Januari 2011
  • Identification of post-necking hardening behaviour of sheet metal – S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte, D. Debruyne – Photomechanics 2011 , Brussels, Belgium, Februari 2011
  • Design of Crack Arrestors for Ultra High Grade Gas Transmission Pipelines: Material Selection, Testing and Modelling – F. Van den Abeele and M. Di Biagio – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Design of Crack Arrestors for Ultra High Grade Gas Transmission Pipelines: Simulation of Crack Initiation, Propagation and Arrest – F. Van den Abeele, M. Di Biago and L. Amlung – Confererence on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Stability of Offshore Structures in Shallow Water Depths – F. Van den Abeele and J. Vande Voorde – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Non Destructive Testing Techniques for Risk Based Inspection – F. Van den Abeele and P. Goes – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Influence of Design Features on the Structural Integrity of Threaded Pipe Connections – T. Galle, W. De Waele, P. De Baets, J. Van Wittenberghe, F. Van den Abeele and S. Jakani – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Stability of Offshore Pipelines in Close Proximity to the Seabed – F. Van den Abeele and J. Vande Voorde – Pipeline Technology Conference , Hannover, Germany, April 2011
  • Relation between electrical steel grade, active mass and efficiency in direct-drive permanent magnet synchronous generator for large scale wind energy application – Damian Kowal, Peter Sergeant, Luc Dupré, Lode Vandenbossche –  IEEE International Magnetics Conference—Intermag 2011, Taipei, Taiwan, Province Of China, April 2011
  • An evaluation of novel MIG/MAG and TIG variants for welding of thin section steels – C.H.J. Gerritsen and T. Baaten – Joining of Materials, JOM-16, Tisvildeleje, Denmark, Mei 2011
  • Advanced electrical steel characterisation of electrical machines subjected to high levels of mechanical stress: automotive traction – Dennis Van Hoecke, Sigrid Jacobs, Bastien Weber, Emmanuel Attrazic – Inductica 2011, Berlin, Germany, Mei 2011
  • XRF versus GDOES in steel industry applications – M. Madani  – CETAS 2011 – 8th Int. Workshop on Progress in Analytical Chemistry & Materials Characterisation in the Steel and Metal Industries, Luxembourg, Luxembourg, Mei 2011
  • Coupled Eulerian Lagrangian Approach to Model Offshore Platform Movements in Strong Tidal Flows – F. Van den Abeele and J. Vande Voorde –  OMAE 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (June 19-24, 2011), Rotterdam, Netherlands, Juni 2011
  • Relationship between Charpy V-notch impact value and fracture mechanics toughness – P. Thibaux and F. Van den Abeele – The 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), Rotterdam, Netherlands, Juni 2011
  • Hydrogen Transport in 34CrMo4 Martensitic Steels: Influence of Microstructural Defects on H Diffusion – L. MOLI-SANCHEZ, F. MARTIN, E. LEUNIS, J. CHENE – DIMAT2011 – International Conference on Diffusion in Materials, Dijon, France, Juli 2011
  • Etude par thermodesorption (TDS) du piègeage de l’hydrogène dans des aciers martensitiques revêtus  – MOLI-SANCHEZ Laura, CHENE Jacques, LEUNIS Elke, MARTIN Frantz, MARCHETTI Loïc, WERY Martine – Journées <Jeunes Chercheurs 2011>, Lyon, France, Juli 2011
  • The Surface Chemical Characteristics of Galvanised Steel Substrates – S. Ng, M-L Abel, J.F. Watts and J. Wielant – ECASIA 2011 [European Conference on Applications of Surface and Interface Analysis ], Cardiff, United Kingdom, September 2011
  • Hydrogen behaviour in  34CrMo4 martensitic steels: influence of microstructural defects on H trapping and embrittlement  – Laura Moli-Sanchez, Frantz Martin, Elke Leunis, Jacques Chêne, Martine Wery – WHTC2011 – 4th World Hydrogen Technologies Convention, Glasgow, United Kingdom, September 2011
  • Temperature distribution for several material grades in direct-drive PM synchronous generators for 5 MW wind turbines – Damian Kowal, Peter Sergeant, Luc Dupré, Lode Vandenbossche – 20th Soft Magnetic Materials Conference, Kos, Greece, September 2011
  • Study of the hydrogen traps in a high strength TRIP steel by Thermal Desorption Spectroscopy, X-ray Diffraction and Differential Scanning Calorimetry – D. Pérez Escobar, M. Verhaege, L. Duprez, K. Verbeken – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • H-embrittlement mechanisms in 34CrMo4 martensitic steels – L. Moli-Sanchez, J. Chêne, F. Martin, E. Leunis – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • Constant Load Testing with In-Situ hydrogen Charging on Martensitic Ultra High Strength Steel – L. Duprez, M. Arafin, F. Van den Abeele, N. Bernier, D. B. Rosado, J. De Mey, V. Van Speybroeck – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • In-situ mechanical evaluation of hydrogen embrittlement for TRIP, FB, DP and HSLA steels – T. Depover, D. Pérez Escobar, E. Wallaert, M. Verhaege, L. Duprez, K. Verbeken – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • Factors Affecting the Toughness of High Frequency Induction Welded Pipes – Ö. E. Güngör, M. Liebeherr, D. Quidort – AWST 2011 – IIW International Congress on Advances in Welding Science & Technology , Antalya, Turkey, Oktober 2011
  • New Electrical Steels for high performance traction motors – Lode Vandenbossche, Sigrid Jacobs, Dennis Van Hoecke, Bastien Weber, Emmanuel – EEVC October Brussels 26-28, 2011, Brussels, Belgium, October 2011
  • Investigation of fatigue improvement techniques for welds – H. Ahmed, C.H.J. Gerritsen & T. Baaten – BIL/NIL welding symposium, Gent, Belgium, November 2011
  • Development and weldability assessment of heavy gauge X80 line pipe steel for spiral welded pipe – Martin Liebeherr, Özlem Esma Güngör, David Quidort, Denis Lèbre, Nenad Ilić – CBMM Welding of High Strength Pipeline Steels, International Seminar 28-30 November 2011, Araxa, Brazil, , Brazil, November 2011