• Elke Leunis, Melanie Gauvin – Can carbides resist during nitriding? – 2018/04/12 – Friedrichshafen, Germany – European Conference on heat treatment: Nitriding and Nitrocarburizing (2018)
  • Marc Leveaux, Laura Moli Sanchez, Zinedine Zermout, Irati Lizarraga Ferro – Influence of the enamelling process on hydrogen permeation, comparison between permeation & high temperature charging – 2018/05/28 – chicago, USA – 24th intenrnational enamelling congress, (2018) pp. 129-136
  • S. Cooreman, P. Thibaux, F. Tankoua, J. Crépin, A.-F. Gourgues-Lorenzon – Brittle out-of-plane cracking in pipeline steels
    2018/04/10 – Gent, Belgium – Technology for Future and Aging Pipelines 2018 10-12 April 2018 Gent (2018)
  • S. Cooreman, P. Thibaux, M. Liebeherr – Prediction of mechanical properties on large diameter welded pipes through advanced constitutive modelling 2018/07/30 – Tokio, Japan – NUMISHEET 2018 (2018)
  • S. Cooreman, D. Van Hoecke, M. Liebeherr, P. Thibaux, H. Luccioni  – Advanced constitutive model for the accurate evaluation of the structural performance of welded pipes in offshore applications – 2018/09/24 – Calgary, Canada – 12th International Pipeline Conference (IPC 2018) (2018
  • P. Thibaux, E Van Pottelberg – Development of a welding sequence optimised for the fatigue resistance of tubular joints with a novel representative weld sample – 2018/06/17 – Madrid, Spain – OMAE : 37th International Conference on Ocean, Offshore & Arctic Engineering (2018)
  • Krista Van den Bergh, Zinedine Zermout, Dennis Van Hoecke, Lode Duprez, Joost De Strycker – Towards a better understanding of hydrogen embrittlement of steel in sour service conditions 2018/09/09 – Krakow, Poland – Eurocorr 2018 (2018)
  • Krista Van den Bergh, Zinedine Zermout, Patrick Goes – Towards a better understanding of hydrogen embrittlement testing of steel in sour service conditions by coupling H diffusion to fracture mechanics – 2018/05/29 – Ghent, Belgium – SteelyHydrogen 2018 29-31 May 2018 Ghent (2018)
  • Debora Rosseel, David Mercier, Mélanie Gauvin, Franck Nozahic, Krista van den Bergh – Quantitative mapping of nanoscale mechanical properties of Zn-Al coating on steel by nanoindentation – 2018/09/11 – Liège, Belgium – Indentation 2018 (2018)
  • Monika Lukaczynska, Krista Van den Bergh, Joost De Strycker, Herman Terryn, Jon Ustarroz – Influence of Applied Potential, Water Content and Forced Convection on the Electrodeposition of Ni Films on Steel from Choline Chloride Based Deep Eutectic Solvents –
    2018/05/13 – Seattle, USA – 233rd ECS MEETING (2018)
  • Monika Lukaczynska, Krista Van den Bergh, Joost De Strycker, Herman Terryn, Jon Ustarroz – Electrochemical deposition of Nickel films from choline chloride based Deep Eutectic Solvents – 2018/02/21 – Blankenberge, Belgium – ChemCYS2018 (2018)
  • Krista Van den Bergh, Kurt De Sloover, Joachim Noens, Dennis Van Hoecke, Joost De Strycker – Hydrogen uptake by high-strength steels during electrodeposition process – 2018/05/29 – Ghent, Belgium – SteelyHydrogen 2018 29-31 May 2018 Ghent (2018)
  • M. Liebeherr, O.E. Gungor, N. Sanchez, H. Luccioni, N. Ilic – Recommendations for submerged arc spiral welding with optimised CTOD properties – 2018/09/24 – Calgary, Canada – 12th International Pipeline Conference (IPC 2018) (2018)
  • Reza H. Talemi, Jie Zhang, Stijn Hertelé, Wim De Waele – Fretting Fatigue Fracture in Lug Joints Made of High Strength Steel – 2018/05/27 – Poitiers, France – 12th International Fatigue Congress (2018)
  • John Vande Voorde and Jeroen Van Wittenberghe – Prediction of the Leakage Threshold for Hertzian Contact Seals: A Cellular Automata Model – 2018/07/15 – Prague, Czech Republic – PVP2018 (2018)
  • Jeroen Van Wittenberghe and John Vande Voorde – Prediction of the Leakage Threshold for Hertzian Contact Seals: An Experimental Approach – 2018/07/15 – Prague, Czech Republic – PVP2018 (2018)
  • John Vande Voorde, Filip Van den Abeele, Steven Cooreman – Optimization of the Structural Performance for Corrugated Blast Panels on Offshore Platforms – 2018/06/17 – Madrid, Spain – OMAE : 37th International Conference on Ocean, Offshore & Arctic Engineering (2018)
  • Reza Hojjati Talemi, Haroun Mahgerefteh, Sergey Martynov, Solomon Brown – Three-dimensional simulation of dynamic ductile crack propagation in steel pipeline using coupled fluid-structure modelling – 2018/09/19 – Verona, Italy – The 6th International Conference on Crack Paths (CP 2018) (2018)
  • Reza H. Talemi, Antônio de Souza Braga Neto, Annick Willems, Negar Gilani, Quang Tien Ngo – Cleavage fracture assessment of cold charged steel slabs using experimental and numerical approaches – 2018/08/26 – Belgrade, Serbia , – 22nd European Conference on Fracture – ECF22 (2018)
  • Jeroen Van Wittenberghe, Philippe Thibaux – Innovative resonant bending test set-up for fatigue testing of pipelines with directional loading control – 2018/04/10 – Gent, Belgium – Technology for Future and Aging Pipelines 2018 10-12 April 2018 Gent (2018)
  • Jan Rens, Sigrid Jacobs, Emmanual Attrazic – Improved loss modelling of electrical traction motors by including magnetic skin effect
    2018/11/07 – Nottingham, United Kingdom – ESARS-ITEC: Electrical systems for aircraft, railway, ship propulsion and road vehicles and international transportation electrification conference (2018)
  • Jan Rens, Sigrid Jacobs, Lode Vandenbossche, Emmanuel Attrazic – Improved core loss modelling of electrical traction motors through simulation of skin effect in laminations 2018/09/30 – Kobe, Japan – Electrical Vehicle Symposium EVS31 (2018)
  • Lode Vandenbossche, Sigrid Jacobs, Vinicius Araujo Rabello Landeira, Emmanuel Attrazic – Iron loss measurements of non-oriented electrical steels at elevated magnetic polarization: comparison of calorimetric and field-metric methods – 2018/09/23 – Portland, USA – ECCE (IEEE Energy Conversion Congress & Exposition) (2018) pp. 1-5
  • P. Wechsuwanmanee, J. Lian, J. Sukumaran, Á. Kalácska, H. Ben Hamouda, P. De Baets, S. Münstermann – Finite Element Model in Abrasion Analysis for Single-Asperity Scratch Test – 2018/06/09 – Gent, Belgium – Fracture Fatigue and Wear 2018 (FFW) (2018)

  • P. Rodriguez-Calvillo, E. Leunis, T. Van De Putte, S. Jacobs, O. Zacek, W. Saikaly – Influence of initial heating during final high temperature annealing on the offset of primary and secondary recrystallization in Cu-bearing grain oriented electrical steels – AIP Advances, Vol 8 2018
  • C. Garcia Mateo, L. Bracke, M. Somani, A. Latz, D.A. Porter, F.G. Caballero – Harder, better, faster, stronger  – Image And Vision Computing, Vol. 218 (2018) pp. 94-96
  • J. A. Muñoz, O. F. Higuera,A. Hernández Expósito, A. Boulaajaj, R. E. Bolmaro, F. D. Dumitru, P. Rodriguez-Calvillo, A. Moreira Jorge Jr, J. M. Cabrera – Thermal stability of ARMCO iron processed by ECAP  – International Journal of Advanced Manufacturing Technology , Vol. 98 (2018) pp. 2917-2932
  • F. Tankoua, J. Crépin, P. Thibaux, S. Cooreman, A.-F. Gourgues-Lorenzon – Quantification and microstructural origin of the anisotropic nature of the sensitivity to brittle cleavage fracture for hot-rolled pipeline steels  – International Journal of Fracture, Vol. 212 (2018) pp. 143–166
  • Sam De Waele, Kurt Lejaeghere, Elke Leunis, Lode Duprez, Stefaan Cottenier – A first-principles reassessment of the Fe-N phase diagram in the low-nitrogen limit Journal of Alloys And Compounds – Vol. 775 (2018) pp. 758-768
  • J.C.R. Pereira, Jeroen Van Wittenberghe, A.M.P. de Jesus, Philippe Thibaux, J.A.F.O. Correia, A.A. Fernandes – Damage behaviour of full-scale straight pipes under extreme cyclic bending conditions  – Journal of Constructional Steel Research, Vol. 143 (2018) pp. 97-109
  • Kangying Zhu, Hui Shi, Hao Chen, Coralie Jung – Effect of Al on martensite tempering: comparison with Si – Journal of Materials Science
    Volume 53, Issue 9, pp 6951–6967
  • R. Zhang, W. Zheng, X. Veys, G. Huyberechts, H. Springer, M. Selleby – Prediction of Martensite Start Temperature for Lightweight Fe-Mn-Al-C Steels – Journal of Phase Equilibria And Diffusion, Vol. 39 Issue 5 (2018) pp. 476-489
  • B. Lemmens, H. Springer, M. Peeters, I. De Graeve, J. De Strycker, D. Raabe, K. Verbeken – Deformation induced degradation of hot-dip aluminized steel – Materials Science And Engineering – A – Structural Materials, Vol. A 710 (2018) pp. 385-391

Publication Title Author(s) Conference

The behaviour of austenite during bar rolling 

 

 Elke Leunis, Kris Hertschap, Nuria Sanchez Mourino  2017/03/15 – Freiberg, Germany – MEFORM 2017 – “Bar and wire rolling”

Form removal aspects on the waviness parameters for steel sheet in automotive applications …

 

 Vermeulen Michel, Balabane Mikhael and Mallé Céline 2017/01/30 – Chemnitz, Germany – XIV. International Colloquium on Surfaces Chemnitz 30 Jan- February 1, 2017

Finite element simulation of cleavage fracture propagation in pipeline steels using XFEM-cohesive segment technique

 

 Reza Hojjati Talemi 2017/06/18 – Rhodes, Greece – 14th International Conference on Fracture

Numerical study on influence of non-proportional stressing on fretting fatigue life assessment

 

 Reza Hojjati Talemi 2017/07/03 – Cambridge, United Kingdom – Fatigue 2017 

Ductile Tearing Of Welds In Pipe Submitted To Cyclic Loading

 

 Philippe Thibaux, Steven Cooreman, Antonio Carlucci, Johan Vekeman, Koen Van Minnebruggen, Wim De Waele 2017/06/25 – Trondheim, Norway – OMAE

On Complete Solutions for the Problem of Diffuse Necking in Sheet Metal

 

 Sam Coppieters, J.-H. Kim, Kristof Denys, Steven Cooreman, Dimitri Debruyne 2017/09/17 – Cambridge, United Kingdom –  International Conference on the Technology of Plasticity – ICTP 2017

Dynamic fracture behavior of high strength pipeline steel

 

 Sarath Chandran, Patricia Verleysen, Junhe Lian, Wenqi Liu, Steven Cooreman, Sebastian Münstermann 2017/09/12 – Trondheim, Norway – Dymat 2017 – Dynamic fracture of ductile materials

Surface contaminants and their contribution to spangle variation on Galvalume sheet

 

 A. Dhont, F. Horzenbergher 2017/09/18 – Toronto, Canada – Interzac

The production of uniform spangle Galvalume sheet

 

 F. Horzenberger, A. Dhont 2017/09/18 – Toronto, Canada – Interzac

Iron Loss modelling of a PMSM Traction Motor, including magnetic degradation due to lamination laser cutting

 

 Lode Vandenbossche, Sven Luthardt, Sigrid Jacobs, Stefan Schmitz, Emmanuel Attrazic 2017/10/09 – Stuttgart, Germany – EVS – 30th International Electric Vehicle Symposium & Exhibition

Numerical and Experimental Evaluation of Magnetostriction and Magnetic Forces on Transformer Stacks and Joints for the Assessment of Core Vibrations

 

 Jan Rens, Sigrid Jacobs, Maarten Van Poucke, Emmanuel Attrazic 2017/10/01 – Cincinnati, USA – IEEE – Energy Conversion Congress and Expo

Thermo-metallurgical coupled simulation for the analysis of microstructure in welds

 

 J. Ni, J. Vande Voorde, J. Antonissen, M. Abdel Wahab 2017/05/17 – Metz, France – International Congress on Welding, Additive Manufacturing and Non Destructive Testing 17-19 May 2017 Metz

Corrosion Modelling Tool And High Throughput Approach Facilitates Smart Metallic Coating Design 

 

 K. Van den Bergh, J. De Strycker, C. Allely, O. Dolgikh, H. Simillion, S. Lamaka, A. Bastos, B. Van Den Bossche, J. Deconinck 2017/11/12 – Tokyo, Japan – Galvatech 2017

New insights in intermetallic phases and interfaces between Al-alloys and steel and possible impact on in-use properties

 

 Babs Lemmens, Hauke Springer, Beril Corlu, Joost De Strycker, Iris De Graeve, Kim Verbeken 2017/11/12 – Tokyo, Japan – Galvatech 2017

On the anti-corrosion performance of Zn-Al-Mg substrates under natural exposure

 

 B. Corlu, C. Dieu, C. Allely, T. Machado Amorim, J. De Strycker 2017/11/12 – Tokyo, Japan – Galvatech 2017

SPECIES – Speciation of Chromium in Ionic Liquids as alternative Electrodeposition Solvents

 

 Tim Verdonck, Philippe Verpoort, Rik van Deun, Kristof Van Hecke 2016/03/16 – Blankenberge, Belgium – Chemistry Conference for Young Scientists

EVS paper: effect of stator segmentation and manufacturing degradation on performance of IPM, using iCARe

 

 Jan Rens, Sigrid Jacobs, Lode Vandenbossche 2016/06/19 – Montréal, Canada – Electrical Vehicle Symposium (EVS29)

Optimisation And Welding Pre-Qualification Of Heavy Plate For Offshore Applications

 

 C.H.J. Gerritsen, X. Veys, M. Liebeherr, J.M. Vigil 2016/05/17 – Gijón, Spain – Interjoin III

Effect of stator segmentation and manufacturing degradation on the perfomance of IPM machines, using iCARe electrical steels

 

 Jan Rens, Sigrid Jacobs, Lode Vandenbossche, Emmanual Attrazic 2016/06/01 – Seville, Spain – 11th International Conference on Multiaxial Fatigue & Fracture (ICMFF11)

Comparative Spectroscopic Study of Cr(III) in Ionic Liquids and Water as Electrodeposition Solvent

 

 Tim Verdonck, Philippe Verpoort, Rik Van Deun, Kristof Van Hecke 2016/07/03 – Vienna, Austria – EUCHEM on moltens salts and ionic liquids

Ultra-low-cycle fatigue behaviour of full-scale straight pipes under alternating bending

 

 J.C.R. Pereira, J. Van Wittenberghe, A. Jesus, P. Thibault, A.A. Fernandes 2016/07/17 – Vancouver, Canada – PVP2016 – International Conference on Pressure Vessels and Piping

Pipe Material Weldability for sour service conditions

 

 Philippe Thibaux, Vincent Gaffard 2016/06/26 – Rhodos, Greece – ISOPE 2016 International Society of Offshore and Polar Engineers

High Peak Strain on Pipeline Material During Reel-lay: Acceptable or not?

 

 Erwan Karjadi, Henk Smienk, Philippe Thibaux, Olav Aamlid 2016/06/26 – Rhodos, Greece – ISOPE 2016 International Society of Offshore and Polar Engineers

Experimental and Numerical Study on the Evolution of Mechanical Properties During Spiral Pipe Forming

 

 S. Cooreman, D. van Hoecke, M. Liebeherr, P. Thibaux, M. Yamaguti Enderlin 2016/09/26 – Calgary, Canada – IPC2016 – International Pipeline Conference & Exposition

Effects of High Strain Rates on Ductile Slant Fracture Behaviour of Pipeline Steel: Experiments and Modelling

 

 R. Hojjati, M. Steinhoff, S. Cooreman, F. Van den Abeele, P. Verleysen 2016/09/26 – Calgary, Canada – IPC2016 – International Pipeline Conference & Exposition

Identification of 3D Anisotropic Yield Surface of X70 Pipeline Steel Using a Multi-DIC Setup

 

 K. Denys, S. Coppieters, R. Van Hecke, S. Cooreman, D. Debruyne 2016/09/26 – Calgary, Canada – IPC2016 – International Pipeline Conference & Exposition

Steels for mobile cranes – Development of Amstrong® Ultra 900MCL and 960MCL with a focus on mechanical properties, formability and weldability

 

 C.H.J. Gerritsen & L. Bracke 2016/11/22 – Rostock, Germany – 9th Rostocker Welding Days

Effect of submerged arc welding filler wire selection on weld metal toughness of high & low Nb alloyed linepipe steel

 

 Ö.E. Güngör, M. Liebeherr 2016/11/02 – Gorinchem, Netherlands – NIL/BIL Welding symposium

Improved Calculation of Iron Losses in Large Salient-Pole Synchronous Hydro-Generators

 

 Lode Vandenbossche, Thomas Lugand, Sigrid Jacobs, Alexander Schwery 2016/11/30 – Nürnberg, Germany – EDPC – International Electric Drives Production Conference

Electrodeposition of Ni coatings on low carbon steel from choline chloride based Deep Eutectic Solvents

 

 Monika Lukaczynska, Jon Ustarroz, Krista Van den Bergh, Joost De Strycker, Herman Terryn 2016/08/21 – Den Haag, Netherlands – Electrochemistry: from Sense to Sustainability (ISE)

Low carbon steel electroplated with Ni coating from choline chloride based Deep Eutectic Solvents

 

 Monika Lukaczynska, El Amine Mernissi Cherigui, Jon Ustarroz, Krista Van den Bergh, Joost De Strycker, Herman Terryn 2016/10/24 – Blankenberge, Belgium – Chemical Research in Flanders Symposium – CRF 

Trivalent hard chrome plating using ionic liquid technology

 

 Rob van de Coevering 2016/10/04 – ‘s Hertogenbosch, Netherlands – Surface 2016

A density-functional theory investigation of Fe4N and Fe16N2 precipitates in an Fe-N solid solution

 

 Sam De Waele, Kurt Lejaeghere, Elke Leunis, Roger Hubert, Lode Duprez, Stefaan Cottenier 2016/10/03 – Dusseldorf, Germany – Ab initio Description of Iron and Steel (ADIS2016)

Effects of cutting and annealing of amorphous materials for high speed permanent magnet machines

 

 Jonas Celie, Marnix Stie, Jan Rens, Peter Sergeant 2016/09/04 – Lausanne, Switzerland – ICEM2016

Publication Title Author(s) Journal Reference

Transferring Nanoscale Bainite Concept to Lower C Contents: A Perspective

 

 Carlos Garcia-Mateo, Georg Paul, Mahesh C. Somani, David A. Porter, Lieven Bracke, Andreas Latz, Carlos Garcia De Andres and Francisca G. Caballero Metals Vol. 7 (2017) pp. 159

Numerical measures of non-proportionality degree in incomplete contact subjected to fretting fatigue loading

 

 Reza Hojjati Talemi Theoretical and Applied Fracture Mechanics Vol. 90 (2017) pp. 33-42

Experimental and numerical study on effect of forming process on low cycle fatigue behavior of high strength steel

 

 Reza Hojjati Talemi, S. Chhith & W. De Waele Fatigue and Fracture of Engineering Materials and Structure Vol. 40 (2017) pp. 2050-67

Alternative method for the identification of the strain hardening behaviour along the rolling direction of coil

 

 Kristof Denys, Sam Coppieters, Steven Cooreman, Dimitri Debruyne Strain  (2017) pp. DOI: 10.1111/str.12231

Advanced Plasticity Modeling for Ultra-Low-Cycle-Fatigue Simulation of Steel Pipe

 

 Rongting Li, Philip Eyckens, Daxin E, Jerzy Gawad, Maarten Van Poucke, Steven Cooreman, Albert Van Bael Metals Vol. 7(4) (2017) pp. 140

Finite element simulation of the dynamic behaviour of deep drawn

 

 F. Greco, E. Deckers, J. Stroobants, S. Van Poppel, K. Linck, W. Desmet Finite Elements In Analysis and Design Vol. 138 (2017) pp. 12-20

Development of Direct Quenched Hot Rolled Martensitic Strip Steels

 

 Lieven Bracke, Dorien De Knijf, Christoph Gerritsen, Reza Hojjati Talemi Metals Vol. 7 (2017) pp. 326-336

Quantitative Determination of Carbon Concentration Profiles by Glow Discharge Optical Emission Spectroscopy Applied for the Study of Decarburization

 

 Alvarenga, H.D.; Van Steenberge, N.; Xhoffer, C.; Steegstra, P.; Sietsma, J.; Terryn, H. Surface and Interface Analysis Vol. 48 (2016) pp. 73-81

Structure of graphite precipitates in cast iron

 

 K.Theuwissen, J. Lacaze, L. Laffont Carbon Vol. 96 (2016) pp. 1120-1128

A Multiple-Action Self-Healing Coating

 

 Alexander Lutz,Otto van den Berg, Jan Wielant, Iris De Graeve and Herman Terryn  Frontiers in Materials  (2016) pp. DOI: https://doi.org/10.3389/fmats.2015.00073

Finite element simulation of dynamic brittle fracture in pipeline steel: A XFEM-based cohesive zone approach

 

 Reza Hojjati-Talemi, Steven Cooreman, Dennis van Hoecke Proceedings of The Institution of Mechanical Engineers Part L – Journal of Materials-Design and Applications  (2016) pp. DOI: https://doi.org/10.1177/1464420715627379 

A hybrid fluid-structure interaction modelling of dynamic brittle fracture in pipeline steel transporting CO2 streams

 

 Reza H. Talemi, Solomon Brownb,, Sergey Martynov, Haroun Mahgerefteh International Journal of Greenhouse Gas Control Vol. 54 (2016) pp. 702-715

Techno-economic assessment of CO2 quality effect on its storage and transport: CO2QUEST: An overview of aims, objectives and main findings

 

 Richard T.J. Porter, Reza H. Talemi and 38 others International Journal of Greenhouse Gas Control Vol. 54 (2016) pp. 662-681

An approach to microstructure quantification interms of impact properties of HSLA pipeline steels

 

 Alexey Gervasyev, Victor Carretero, Jurij Sidor, Nuria Sanchez, Leo A.I. Kestens, Roumen H. Petrov Materials Science and Engineering – A – Structural Materials Vol. 677 (2016) pp. 163-170

Investigations on the fretting fatigue failure mechanism of bolted joints in high strength steel subjected to different levels of pre-tension

 

 Carlos Jiménez-Peña, Reza H. Talemi, Barbara Rossi, Dimitri Debruyne Tribology International Vol. 108 (2016) pp. 128-140

Atom probe tomography of intermetallic phases and interfaces formed in dissimilar joining between Al alloys and steel

 

 B. Lemmens, H. Springer, M.J. Duartec, I. De Graeve, J. De Strycker, D. Raabe, K. Verbeken Materials Characterization Vol. 120 (2016) pp. 268-272

Corrosie modelling tool en high throughput aanpak accelereren het slimme design en testen van nieuwe metallische coatings

 

 Krista Van den Bergh, Joost De Strycker, Rob van de Coevering VOM Info  Vol. 9 (2016) pp. 23-26

  • Fretting fatigue failure mechanism of automotive shock absorber valve –  Reza Hojjati-Talemi, Ali Zahedi, Patrick De Baets – International Journal Of Fatigue, Vol. 73 (2015) pp. 58-65 2015
  • Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels – Irene De Diego-Calderón, Dorien De Knijf, Jon M. Molina-Aldareguia, Ilchat Sabirov, Cecilia Föjer, Roumen Petrov –  Revista De Metalurgia Vol. Jan-March (2015) pp. 1-12 2015
  • Effect of hydrogen carbonate and chloride on zinc corrosion investigated by a scanning flow cell system – Claudius A. Laska, Michael Auinger, P.Ulrich Biedermann, Danish Iqbal, Nadine Laska, Joost De Strycker, Karl J.J. Mayrhofer –  Electrochimica Acta Vol. 159 (2015) pp. 198-209 2015
  • A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels – Xiaojun Xu, Sybrand van der Zwaag, Wei Xu –  Wear,  Vol. 322-323 (2015) pp. 51-60 2015
  • The influence of ultra-fast annealing prior to quenching and partitioning on the microstructure and mechanical properties – Dorien DeKnijf, Athina Puype, Cecilia Föjer, Roumen Petrov – Materials Science And Engineering – A – Structural Materials Vol. 627 (2015) pp. 182–190 2015
  • Influence of Carbide Morphology and Microstructure on the Kinetics of Superficial Decarburization of C-Mn Steels – Alvarenga, H.D.; Van De Putte, T.; Van Steenberge, N.; Sietsma, J.; Terryn, H. – Metallurgical And Materials Transactions A Vol. 46 (2015) pp. 123-133 2015
  • Comparison of Iron Loss Models for Electrical Machines With Different Frequency Domain and Time Domain Methods for Excess Loss Prediction – D. Kowal, P. Sergeant, L. Dupre, L. Vandenbossche –  IEEE Transactions On Magnetics Vol. 51(1) (2015) pp. 1-10 2015
  • Novel use of a micro-optode in overcoming the negative influence of the amperometric micro-probe on localized corrosion measurements – M.G. Taryba, K. Van den Bergh, J. De Strycker, O. Dolgikh, J. Deconinck, S.V. Lamaka – Corrosion Science Vol. 95 (2015) pp. 1-5 2015
  • In situ austenite–martensite interface mobility study during annealing – Dorien De Knijf, Maria J. Santofimia, Hui Shi, Vitaliy Bliznuk, Cecilia Fojer –  Acta Materialia Vol. 9 (2015) pp. 161-168 2015
  • Evaluation of a numerical model for tapered threaded connections subjected to combined loading using enhanced experimental measurement techniques – Timothy Galle, Wim De Waele, Jeroen Van Wittenberghe, Patrick De Baets – Journal of Strain Analysis For Engineering Design Vol. 50 (2015) pp. 561-570 2015
  • Effect of the Cr Content and Coiling Temperature on the Properties  – Lieven Bracke, Wei Xu –  ISIJ International Vol. 5 (2015) pp. 2206-2211 2015
  • Effects of specimen geometry and anisotropic material response on the tensile strain capacity of flawed spiral welded pipes – Koen Van Minnebruggen, Stijn Hertelé, Philippe Thibaux, Wim De Waele – Engineering Fracture Mechanics Vol. 148 (2015) pp. 350-362 2015

  • Effect of in-situ hydrogen charging on the mechanical properties of advanced high strength steels – Tom Depover, ir.; Diana Pérez Escobar, dr. ir.; Elien Wallaert; Zinedine Zermout, dr. – International Journal of Hydrogen Energy, Vol. 39 (2014) pp. 4647–4656
  • Phase transformations during decomposition of austenite between MS and Mf in low-carbon steels – Elisabete Pinto da Silva, Wei Xu, Cecilia Föjer, Yvan Houbaert, Jilt Sietsma, Roumen H. Petrov – Materials Characterization, Vol. 95 (2014) pp. 85–93
  • An alternative to the crystallographic reconstruction of austenite in steels – N. Bernier, L. Bracke, L. Malet, S. Godet – Materials Characterization, Vol. 89 (2014) pp. 23–32
  • Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel – D. DeKnijf, R. Petrov, C. Föjer – Materials Science And Engineering – A – Structural Materials, Vol. 615 (2014) pp. 107–115
  • Microstructural Control of Ductile Crack Propagation in TMCP HSLA Pipeline Steels – V. Carretero Olalla, N. Sanchez, P. Thibaux, R. H. Petrov, L.A.I. Kestens – Advanced Materials Research, Vol. 922 (2014) pp. 568-573
  • Analysis of the strengthening mechanisms in pipeline steels as a function of the hot rolling parameters – Victor Carretero; Vitaliy Bliznuk; Nuria Sanchez; Philippe Thibaux; Leo A. I. Kestens; Roumen H. Petrov – Materials Science And Engineering – A – Structural Materials, Vol. 604 (2014) pp. 46–56
  • Experimental study on the contact angle formation of solidified iron–chromium droplets onto yttria ceramic substrates for the yttria/ferrous alloy system with variable chromium content – K. Verhiest, S. Mullens, J. Paul,I. De Graeve, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken – Ceramics International, Vol. 40 (2014) pp. 2187–2200
  • Comprehensive study on the sintering behavior of yttria nano-powder in contact with electrolytic iron using the rapid solidification processing technique – K. Verhiest, S. Mullens, J. Paul,I. De Graeve, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken – Ceramics International, Vol. 40 (2014) pp. 7679–7692
  • Corrosion product identification at the cut edge of aluminum‐rich metal‐coated steel – A. Alvarez-Pampliega, K. Van den Bergh, J. De Strycker, T. Segato, M. P. Delplancke-Ogletree and H. Terryn – Materials And Corrosion – Werkstoffe Und Korrosion, Vol. 65, 4 (2014) pp. 383–391
  • Corrosion Study on Al-rich Metal-Coated Steel by Odd Random Phase Multisine Electrochemical Impedance Spectroscopy – A. Alvarez-Pampliega T. Hauffman M. Petrova T.Breugelmans T. Muselle K. Van den Bergh J. De Strycker H.Terryn A. Hubin – Electrochimica Acta, Vol. 124 (2014) pp. 165–175
  •  A sessile drop setup for the time-resolved synchrotron study of solid-liquid interactions: Application to intermetallic formation in 55%Al-Zn alloys – N. Bernier, G. B. M. Vaughan, D. De Bruyn, H. Vitoux, M. De Craene, H. Gleyzolle, B. Gorges, J. Scheers and S. Claessens – Applied Physics Letters, Vol. 104 (2014) pp. 171608 
  • Advances in the development of corrosion and creep resistant nano-yttria dispersed ferritic/martensitic alloys using the rapid solidification processing technique – K. Verhiest, S.Mullens, I.DeGraeve, N.DeWispelaere, S.Claessens – Ceramics International, Vol. 40 (2014) pp. 14319–14334
  • Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High- Strength Steels – N. Bernier, L. Bracke, L. Malet, S. Godet – Metallurgical And Materials Transactions A, Vol. 45 (2014) pp. 5937-5955
  • Increase of martensite start temperature after small deformation of austenite – B.B. He, W. Xu, M.X. Huang – Materials Science And Engineering – A – Structural Materials, Vol. 609 (2014) pp. 141-146
  • Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel – Elisabete Pinto da Silva, Wei Xu, Cecilia Föjer, Yvan Houbaert, Jilt Sietsma, Roumen H. Petrov – Advanced Materials Research, Vol. 922 (2014) pp. 682-687
  • Predicting the Austenite Fraction After Intercritical Annealing in Lean Steels as a Function of the Initial Microstructure – Hao Chen, Xiaojun Xu, Wei Xu, Sybrand van der Zwaag – Metallurgical And Materials Transactions A, Vol. 45 (2014) pp. 4
  • Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension – D. De Knijf, T. Nguyen-Minh, R. H. Petrov, L. A. I. Kestens and John J. Jonas – Journal of Applied Crystallography, Vol. 47 (2014) pp. 1261–1266
  • Quantitative Investigation of Brittle Out-of-plane Fracture in X70 Pipeline Steel – F Tanckoua, J Crépin, P Thibaux, S Cooreman, AF Gourgues-Lorenzon – Procedia Materials Science, Vol. 3 (2014) pp. 1149-1154

  • Advances in Post-necking Flow Curve Identification of Sheet Metal through Standard Tensile Testing – Sam Coppieters, Steven Cooreman, Dimitri Debruyne and Toshihiko Kuwabara – – The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Melbourne, Australia, Januari 2014
  • Study of the electrochemical behaviour of aluminized steel – B. Lemmens, Y. Gonzalez Garcia, B. Corlu, J. De Strycker, I. De Graeve and K. Verbeken – ICMCTF 2014: 41th International Conference on Metallurgic Coatings and Thin Films, San Diego, USA, April 2014
  • Effect of hot band annealing conditions on the microstructure and magnetic properties of thin gauge low loss fully processed electrical steels – T. Van De Putte, E. Leunis, X. Chassang, S. Jacobs – dom – International conference on Magnetism and Metallurgy WMM’14, Cardiff, United Kingdom, Juni 2014
  • Performance improvement for transformer core design with key developments in grain-oriented electrical steel – L. Vandenbossche, S. Jacobs, D. Kajfos – CWIEME (Coil Winding, Insulation & Electrical Manufacturing) June 24-26, 2014 Berlin , Berlin, Germany, Juni 2014
  • Industrialisation of Surface Treatment with Electrodeposition Processed from Ionic Liquids – P. Verpoort – 2nd Surface Treatment Symposium, Istanbul, Turkey, Juni 2014
  • Effect of Hot Rolling Parameters on Direct Quenched Low Alloy – Lieven Bracke*, Wei Xu, Tom Waterschoot – ICOMAT – International Conference on Martensitic Transformations, Bilbao, Spain, Juli 2014
  • Chromium electrodeposition using deep eutectic solvents: Recent developments and future challenges in commercial scale processing – Andrew Abbott, Eva Diaz Gonzalez – EUCHEM 2014, Tallinn, Estonia, Juli 2014
  • Anwendung hochfester Stahlsorten in Konstruktion und Fertigung – Einsatz für Baumaschinen und Landmaschinen – Christoph Gerritsen, John Vande Voorde – – Einsatz von hoch- und höchstfesten Stählen in der NFZ-Industrie – Potentiale/Grenzen/Restiktionen, Zweibrücken, Germany, Juli 2014
  • Design validation of field-applied spacers for natural gas transmission pipeline – P Thibaux S Cooreman F Cochard S Cozzolino – – Field Joint Coating 2014, Düsseldorf, Germany, September 2014
  • Girth weldability evaluation of SWAH pipes produced from 23.7 mm thick, high-Nb containing X70 linepipe steel  – Ö. E. Güngör, M. Liebeherr, H. Luccioni – IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
  • Development of X80 line pipe steel for spiral welded pipes with low temperature toughness and excellent weldability – Nuria Sanchez, Özlem E. Güngör, Martin Liebeherr,Nenad Ilić –  IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
  • Measurement of Mechanical Properties on Line Pipe: Comparison of Different Methodologies – Steven Cooreman, Dennis Van Hoecke, Martin Liebeherr, Philippe Thibaux and Mary Yamaguti Enderlin – IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
  • Determination of CTOD Resistance Curves in SENT Specimens With a Tilted Notch – Koen Van Minnebruggen, Matthias Verstraete, Rudi Denys, Philippe Thibaux and Wim De Waele –  IPC 2014: International Pipeline Conference, Calgary, Alberta, Canada, September 2014
  • Magneto-optical and field-metric evaluation of the punching effect on magnetic properties of electrical steels with varying alloying content and grain size – H. Naumoski, A. Maucher, U. Herr, L. Vandenbossche, S. Jacobs, X. Chassang – International Electric Drives Production Conference and Exhibition 2014, Nürnberg, Germany, September 2014
  • Erweiterte Anwendbarkeit von hoch- und höchst-festen Stählen für ermüdungsbeanspruchte, geschweißte Komponenten – Christoph Gerritsen, Sofie Vanrostenberghe –  7. Rostocker Schweisstage, Rostock, Germany, November 2014
  • Upscaling challenges in electrodeposition of metals from deep eutectic solvents – Eva Diaz Gonzalez – Interfacial and transport properties of ionic liquids, Santiago de Compostela, Spain, November 2014

  • Properties of FA-CVD silica coated steel sheet after deformation: coating integrity and corrosion related forming limit curve – René Hausbrand, Tom Van der Donck, Jean-Pierre Celis, Francis Clarysse – Corrosion Engineering, Science and Technology, Vol. 48(7) (2013) pp. 530-36
  • Influence of finishing rolling variables on the austenite recrystallization and grain growth – V. Carretero Olalla, N. Sanchez Mouriño, P. Thibaux, L.A.I. Kestens, R. H. Petrov – Materials Science Forum, Vol. 753 (2013) pp. 439-442
  • Physical Simulation of Hot Rolling Steel Plate and Coil Production for Pipeline Applications – V. Carretero Olalla, N. Sanchez Mouriño, P. Thibaux, L.A.I. Kestens, R Petrov – Materials Science Forum, Vol. 762 (2013) pp. 70-75
  • EBSD study of angular deviations from the Goss component in grain-oriented electrical steels – Nicolas Bernier, Elke Leunis, Carlos Furtado, Tom Van De Putte, Gabor Ban – Micron, Vol. 54-55 (2013) pp. 43-51
  • Structure analysis of aluminium silicon manganese nitride precipitates formed in grain-oriented electrical steels – Nicolas Bernier, Chris Xhoffer, Tom Van De Putte, Montserrat Galceran, Stéphane Godet – Materials Characterization, Vol. 86 (2013) pp. 116-126
  • The effect of electrical steel properties on the temperature distribution in direct-drive PM synchronous generators for 5MW wind turbines – Damian Kowal, Luc Dupré, Peter Sergeant, Lode Vandenbossche – IEEE Transactions On Magnetics, Vol. 49 (10) (2013) pp. p.5371-5377
  • Design of low hardness abrasion resistant steels – Xiaojun Xu, Wei Xu, Sybrand van der Zwaag – Wear, Vol. 301 (2013) pp. 89-93
  • Scanning Kelvin force microscopy study at the cut‐edge of aluminum rich metal coated steel – A. Alvarez-Pampliega, Y. Gonzalez-Garcia, K. Van den Bergh, J. De Strycker and H. Terryn – Materials And Corrosion – Werkstoffe Und Korrosion, Vol. 66 (2013) pp. 16-22
  • Study of local Na+ and Cl− distributions during the cut-edge corrosionof aluminum rich metal-coated steel by scanning vibrating electrode and micro-potentiometric techniques – A. Alvarez-Pampliega, M.G. Taryba, K. Van den Bergh, J. De Strycker, S.V. Lamaka, H. Terryn – Electrochimica Acta, Vol. 102 (2013) pp. 319– 327
  • Mechanism of corrosion protection of hot-dip aluminium–silicon coatings on steel studied by electrochemical depth profiling – Iris De Graeve, Ine Schoukens, Alex Lanzutti, Francesco Andreatta, Ana Alvarez-Pampliega, Joost De Strycker, Lorenzo Fedrizzi, Herman Terryn – Corrosion Science, Vol. 76 (2013) pp. 325–336
  • Effect of surface composition and microstructure of aluminised steel on the formation of a titanium-based conversion layer – Ine Schoukens, Isabelle Vandendael, Joost De Strycker, Adli A. Saleh, Herman Terryn, Iris De Graeve – Surface & Coatings Technology, Vol. 235 (2013) pp. 628–636

  • Reduced-thickness CVN testing to represent slant failure of pipelines – J. Van Wittenberghe, P. Thibaux, P. Goes – SCAD 2013: Sustainable Construction & Design, Gent, Belgium, Februari 2013
  • Fatigue characterization of Electrical Steels for designing high efficiency electrical machines for automotive traction – Dennis VAN HOECKE, Bastien WEBER, Sigrid JACOBS, Emmanuel ATTRAZIC, Sébastien BERGAMO, Richard MONTAUDON –  SF2M—JIP 2013 – FATIGUE BEHAVIOUR: FROM SPECIMEN TO STRUCTURE, Paris, France, Mei 2013
  • Austenite Stability Study by Micro-Tensile Testing of Q&P Steel – Dorien De Knijf, Roumen Petrov, Cecilia Föjer, Leo A.I. Kestens – – Int. Symposium on New Developments in Advanced High Strength Sheet Steels, Vail, Colorado, USA, Juni 2013
  • Industrial Production of Quenching and Partitioning Steel – C. Föjer, J. Mahieu, N. Bernier – – Int. Symposium on New Developments in Advanced High Strength Sheet Steels, Vail, Colorado, USA, Juni 2013
  • Estimation of weld induced residual stresses of thick welded sections using numerical welding simulation – Yogendra (San) Gooroochurn, Philippe Thibaux, Steven Cooreman and Joachim Antonissen – ASME 2013 Pressure Vessels & Piping Conference, Paris, France, Juli 2013
  • Atmospheric DBD plasma processes for production of lightweight composites – D. Vangeneugden, B. Verheyde, J. Wielant – International Symposium on Plasma Chemistry, Cairns, Australia, Augustus 2013
  • Delamination of pipeline steels: determination of an anisotropic cleavage criterion – F. TANKOUA, J. CREPIN, P. THIBAUX, M. ARAFIN, S. COOREMAN, A.F. GOURGUES – 21ème Congrès Français de Mécanique, Bordeaux, France, Augustus 2013
  • Improving traction motor performance via ArcelorMittal’s iCARe electrical steel range for automotive applications: a numerical comparison – Lode Vandenbossche, Sigrid Jacobs, Maarten Van Poucke, Emmanuel Attrazic – Coiltech 2013, Pordenone, Italy, September 2013
  • Weldability Assessment of 24 mm X80 Linepipe Steel for Spiral Welded Pipe – Ö. E. Güngör, M. Liebeherr, P. Fize – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
  • Microstructural control of fracture splitting in HSLA pipeline steels – V. Carretero Olalla, A. Gervasyev, N. Sanchez, P. Thibaux, L.A.I. Kestens, I. Pyshmintsev, R. H. Petrov – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
  • Development of 24mm X80 linepipe steel for spiral pipes with low-temperature toughness – N. Sanchez, N. Ilic, M. Liebeherr –Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
  • Advanced pipeline steels for severe-sour applications – M.A. Arafin, M. Liebeherr, N. Sanchez, B. Michel, P. Fize – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
  • Measurement of mechanical properties on line pipe: difficulties and pitfalls – Steven Cooreman, Dennis Van Hoecke, Martin Liebeherr and Philippe Thibaux – Pipeline Technology Conference 2013 October 7-9, 2013, Ostend, Belgium, Oktober 2013
  • New UV-curable paints for metal: high throughput experimentation for coating development – Philippe Legros, Erwin Bauters – RadTech Europe 2013, Basel, Switzerland, Oktober 2013
  • Improved magnetic modelling of high-efficiency induction machines, taking into account the impact of electrical steel lamination punching on the magnetisation curve and iron loss – Lode Vandenbossche, S. Jacobs – 3rd International Electric Drives Production Conference and Exhibition 2013, Nürnberg, Germany, Oktober 2013
  • Iron loss modelling which includes the impact of punching, applied to high-efficiency induction machines – L. Vandenbossche, X. Jannot, M. McClelland, S. Jacobs, J. Saint-Michel, E. Attrazic – 3rd International Electric Drives Production Conference and Exhibition 2013, Nürnberg, Germany, Oktober 2013
  • Effect of punching and stress concentrations on mechanical behaviour of electrical steels – Dennis Van Hoecke, Sigrid Jacobs, Lode Vandenbossche, Bastien Weber, Emmanuel Attrazic – EVS27. Electric Vehicle Symposium and Exhibition, Barcelona, Spain, November 2013
  • Diode laser weld toe re-melting as a means of fatigue strength improvement – Christoph Gerritsen, Sofie Vanrostenberghe and Matthew Doré – Fatigue design 2013, Senlis, France, November 2013
  • Combined martensite and bainite formation from austenite decomposition in HSLA steel – Elisabete Pinto da Silva, Wei Xu, Cecilia Föjer, Yvan Houbaert, Jilt Sietsma, Roumen H. Petrov – THERMEC 2013, Las Vegas, USA, December 2013

  • Cut-edge corrosion study on painted aluminum rich metallic coated steel by scanning vibrating electrode and micro-potentiometric techniques – A. Alvarez Pampliega, S. Lamaka, M. Madani, J. De Strycker, E. Tourwé, M.G.S. Ferreira, H. Terryn – Electrochimica Acta, Vol. 61 (2012) pp. 107-117
  • How to Analyse Unknown Samples by Pyrolysis GC/MS? – Joeri Vercammen, Valérie Winne and Myriam Madani – Separation Science, Vol. 4 (2012) pp. 11-14
  • Nano-yttria dispersed stainless steel composites composed by the 3 dimensional fiber deposition technique – K. Verhiest, S. Mullens, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken – Journal Of Nuclear Materials, Vol. 428 (2012) pp. 54-64
  • Formulation and preparation of low-concentrated yttria colloidal dispersions – K. Verhiest, S. Mullens, N. De Wispelaere, S. Claessens, A. DeBremaecker, K. Verbeken, Y. Houbaert – Ceramics International, Vol. 38 (2012) pp. 2701-2709
  • Numerical and experimental study of the multi-axial quasi-static strength of clinched connections – Sam Coppieters, Pascal Lava, Renaat Van Hecke, Steven Cooreman, Hugo Sol, Paul Van Houtte and Dimitri Debruyne – International Journal of Material Forming, Vol. 6 (2012) pp. 437-451
  • Strain induced inward grain growth during recrystallisation in steel – Jai Gautam, Roumen Petrov, Elke Leunis and Leo A.I. Kestens – Materials Science Forum, Vol. 715-716 (2012) pp. pp 303-308
  • Thermal desorption spectroscopy study of the interaction between hydrogen and different microstructural constituents in lab cast Fe-C alloys – D. Pérez Escobar, T. Depover, E. Wallaert, L. Duprez, M. Verhaege, K. Verbeken – Corrosion Science, Vol. 65 (2012) pp. 199-208
  • High-throughput analysis for preparation, processing and analysis of TiO2 coatings on steel by chemical solution deposition – Sake Van Gils, Marcos Cuadrado Gil, Isabel Van Driessche, Petra Lommens, Pieter Castelein, Klaartje De Buysser – Journal of Alloys And Compounds, Vol. 540 (2012) pp. 170–178
  • Texture generation and implications in TWIP steels – Lieven Bracke, Kim Verbeken, Leo Kestens, – Scripta Materialia, Vol. 66 (2012) pp. 1007–1011
  • Grossflächige plasmavorbehandlung und PECVD bei Atmosphärendruck mittels LARGE-Plasmaquelle – L. Kotte, G. Mäder, J. Roch, B. Leupolt, S. Kaskel, J. Wielant, T. Mertens, F. Gammel – Jahrbuch Oberflächentechnik, (2012) pp. 49-60
  • Corrosion of flame-assisted CVD silica-coated steel sheet – R. Hausbrand, , B. Bolado-Escudero, A. Dhont, J. Wielant – Corrosion Science, Vol. 61 (2012) pp. 28-34
  • Effect of Local Surface Microstructure and Composition on the Electrochemical Behavior of Hot Dip Aluminum-Silicon Coatings on Steel – I. Schoukens, I. De Graeve, J. De Strycker, and H. Terryn – Corrosion – The Journal of Science and Engineering – Nace, Vol. 68 (2012) pp. 982-993

  • Comparison of Hole Expansion Properties of Quench & Partitioned, Quench & Tempered and Austempered Steels – De Moor, E., Matlock, D., Speer, J., Föjer, C. et al. – SAE 2012 World Congress & Exhibition, Detroit, USA, April 2012
  • Extending the drive range of electric vehicles by higher efficiency and high power density traction motors, via a new generation of Electrical Steels – Lode Vandenbossche, Sigrid Jacobs, Dennis Van Hoecke, Bastien Weber, Emmanuel Attrazic – – Electric Vehicle Symposium (EVS26), Los Angeles CA, USA, Mei 2012
  • Understanding thermal warping and sagging in enameled steel parts through an integrated FE simulation – S. Cooreman, Ph. Gousselot, M. Leveaux, P. Pol, J. Antonissen – 22nd International Enamellers Congress, Köln, Germany, Juni 2012
  • A new generation of high performance electrical steels for automotive applications – Elke Leunis, Lode Vandenbossche, Dennis Van Hoecke, Sigrod Jacobs, Emmanuel Attrazic – WMM12: 5th International Conference Magnetism and Metallurgy , Gent, Belgium, Juni 2012
  • An innovative approach for the evaluation of iron losses in magnetic laminations, applied to the optimization of highly saturated electric motors – Lode Vandenbossche, Sigrid Jacobs, Raphael Andreux, Nicolas Labbe, Emmanuel Attrazic – INDUCTICA + CWIEME 2012, Berlin, Germany, Juni 2012
  • Effect of chloride and sulfate on zinc corrosion investigated by a scanning flow cell system with dynamic electrolyte change – Claudius A. Laska, Sebastian O. Klemm, Karl J. J. Mayrhofer, Myriam Madani, Joost De Strycker – EUROCORR 2012, Istanbul, Turkey, September 2012
  • Evaluation of Hydrogen Trapping in Iron-Based Alloys by Thermal Desorption Spectroscopy – D. Perez Escobar, M. Verhaege, L. Duprez, K. Verbeken – – 2012 International Hydrogen Conference , Moran, September 2012
  • Evaluation of the effect of in-situ hydrogen charging on the mechanical properties of iron-based alloys  – T. DEPOVER, E. WALLAERT, Z. ZERMOUT, K. VERBEKEN – – 2012 International Hydrogen Conference , Moran, September 2012
  • TDS evaluation of the hydrogen trapping capacity of NbC precipitates – E. Wallaert, T. Depover, B. pieters, M. A. Arafin, K. Verbeken – – 2012 International Hydrogen Conference , Moran, September 2012
  • On the influence of tempering on hydrogen permeation in a 34CrMo4 martensitic steel – L. Moli-Sanchez, F. Martin, E. Leunis, M. Wery and J. Chêne – – 2012 International Hydrogen Conference , Moran, September 2012
  • Comparison of the tensile behavior of a tempered 34CrMo4 steel exposed in situ to high pressure H2 gas or to cathodic H charging – L. Moli-Sanchez, F. Martin, E. Leunis, L. Briottet, P. Lemoine and J. Chêne – – 2012 International Hydrogen Conference , Moran, September 2012
  • Current findings from the SSC testing and their implementation for the trial production of casing pipe grade T95 – M. A. ARAFIN, M. JANOŠEC, J. BÁR, R. PACHLOPNÍK, Z. VAŠEK – New methods of damage and failure analysis of structural parts, Ostrava, Czech Republic, September 2012
  • Effects of rolling reduction schedule on microstructure and properties of pipeline steel grades – V. Carretero Olalla, N. Sánchez Mouriño, P. Thibaux, R. H. Petrov, L.A.I. Kestens – TMP 2012 – 4th Int. Conf. on Thermomechanical Processing of Steels , Sheffield, United Kingdom, September 2012
  • Mechanical anisotropy of hot rolled linepipe steel coil – N. Sánchez, D. Van Hoecke, M. Liebeherr – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
  • Characterization of X80 grade linepipe steel coil with 24 mm thickness – N. Sánchez, M. Liebeherr, N. Ilic – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
  • Dynamic Behaviour of high strength pipeline steel – F. Van den Abeele, J. Peirs, P. Verleysen, F. Oikonomides, J. Van Wittenberghe – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
  • Modelling of slant failure using small size specimen – P. Thibaux, J. Van Wittenberghe – International Pipeline Conference IPC 2012, Calgary, Canada, September 2012
  • Optimization and characterization of a quenching and partitioning heat treatment on a low carbon steel – D. De Knijf, R. Petrov, C. Föjer, L.A.I. Kestens – MS&T 2012, Pittsburgh, USA, Oktober 2012
  • Improved iron loss modelling approach for advanced electrical steels operating at high frequencies and high inductions in automotive machines – L. Vandenbossche, S. Jacobs, D. Van Hoecke, B. Weber, E. Leunis, E. Attrazic – EDPC – International Electric Drives Production Conference and Exhibition 2012, Nürnberg, Germany, Oktober 2012
  • Verbeteren van de vermoeiingssterkte van lassen in hogesterktestalen – C.H.J. Gerritsen, S. Vanrostenberghe, H. Ahmed and T. Baaten (BIL) – NIL-BIL Lassymposium 2012, Gorinchem, Netherlands, November 2012

  • Enhanced Failure Criteria for Composite Crack Arrestors – F. Van den Abeele and T. Skocovsky – Journal of Pipeline Engineering , Vol. Q1 (2011) pp. 57-69
  • Assessment of a low-cost protocol for an ab initio based prediction of the mixing enthalpy at elevated temperatures: The Fe-Mo system – Kurt Lejaeghere, Stefaan Cottenier, Serge Claessens, Michel Waroquier, Veronique van Speybroeck – Physical Review B, Vol. 83 (2011) pp. 184201
  • Effect of Carbon Modification of Particles on Their Incorporation Rate during Electrodeposition – Dimitri Soccol, Johan Martens, Serge Claessens and Jan Fransaer – Journal of Electrochemical Society, Vol. 158 (2011) pp. 515-523
  • Effect of Mn on the Nanoprecipitation in Binary Fe-Cu alloys – Rajashekhara Shabadi, Roland Taillard, Bertrand Radiguet, Jeremie de Baerdemaeker and Elke Leunis – Solid State Phenomena, Vol. 172-174 (2011) pp. 297-302
  • Tackling the toughness of steel pipes produced by high frequency induction welding and heat-treatment – P. Yan, Ö.E. Güngör, P. Thibaux, M. Liebeherr, H.K.D.H. Bhadeshia – Materials Science And Engineering – A – Structural Materials, Vol. 528 (2011) pp. 8492-8499
  • S700MC/Grade 100 in heavy gauges: Industrialisation at ArcelorMittal Europe – L. Bracke, N. De Wispelaere, H. Ahmed, Ö. E. Güngör – Revue De Métallurgie, Vol. 108 (2011) pp. 323–330
  • Influence of the electrical steel grade on the performance of the direct-drive and single stage gearbox permanent-magnet machine for wind energy generation, based on an analytical model – Damian Kowal, Luc Dupré, Peter Sergeant, Lode Vandenbossche, Marc De Wulf – IEEE Transactions On Magnetics, Vol. 47(12) (2011) pp. 4781-4790
  • Weerstands- versus laserpuntlassen – C.H.J. Gerritsen, S. Daneshpour, M. Koçak and S. Riekehr – Lastechniek, (2011) pp. 18-22
  • Laserlassen S700MC. Invloed van voor- en nawarmen met inductie – Ö.E. Güngör, C.H.J. Gerritsen en J. Goudemez – Lastechniek, (2011) pp. 14-17
  • Identification of the post-necking hardening behaviour of sheet metal by comparison of the internal and external work in the necking zone – S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte, D. Debruyne – Journal Of Materials Processing Technology, Vol. 211 (3) (2011) pp. 545-552
  • Reproducing the experimental pull-out and shear strength of clinched sheet metal connections using FEA – S. Coppieters, S. Cooreman, P. Lava, H. Sol, P. Van Houtte, D. Debruyne – International Journal of Material Forming, Vol. 4 (4) (2011) pp. 429-440
  • Bulk Metallic Glasses (BMG): A competing or complementary technology to Metal Injection Moulding? – F. Van Camp and L. Oelbrandt – Powder Injection Moulding International, Vol. 5(3) (2011) pp. 78-82
  • Influence of Rolling Temperature and Cooling Rate on Microstructure and Properties of Pipeline Steel Grades – V. Carretero Olalla, R. H. Petrov, P. Thibaux, M. Liebeherr, P. Gurla, L. A.I. Kestens – Materials Science Forum, (2011) pp. Vols. 706-709 (2012)

  • Improving the value of steel through UV curable coatings – Ph. Legros – RTE Metal Coatings Seminar 2011 (OCAS), Zelzate, Belgium, Januari 2011
  • Identification of post-necking hardening behaviour of sheet metal – S. Coppieters, S. Cooreman, H. Sol, P. Van Houtte, D. Debruyne – Photomechanics 2011 , Brussels, Belgium, Februari 2011
  • Design of Crack Arrestors for Ultra High Grade Gas Transmission Pipelines: Material Selection, Testing and Modelling – F. Van den Abeele and M. Di Biagio – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Design of Crack Arrestors for Ultra High Grade Gas Transmission Pipelines: Simulation of Crack Initiation, Propagation and Arrest – F. Van den Abeele, M. Di Biago and L. Amlung – Confererence on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Stability of Offshore Structures in Shallow Water Depths – F. Van den Abeele and J. Vande Voorde – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Non Destructive Testing Techniques for Risk Based Inspection – F. Van den Abeele and P. Goes – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Influence of Design Features on the Structural Integrity of Threaded Pipe Connections – T. Galle, W. De Waele, P. De Baets, J. Van Wittenberghe, F. Van den Abeele and S. Jakani – Conference on Sustainable Construction and Design, Gent, Belgium, Februari 2011
  • Stability of Offshore Pipelines in Close Proximity to the Seabed – F. Van den Abeele and J. Vande Voorde – Pipeline Technology Conference , Hannover, Germany, April 2011
  • Relation between electrical steel grade, active mass and efficiency in direct-drive permanent magnet synchronous generator for large scale wind energy application – Damian Kowal, Peter Sergeant, Luc Dupré, Lode Vandenbossche –  IEEE International Magnetics Conference—Intermag 2011, Taipei, Taiwan, Province Of China, April 2011
  • An evaluation of novel MIG/MAG and TIG variants for welding of thin section steels – C.H.J. Gerritsen and T. Baaten – Joining of Materials, JOM-16, Tisvildeleje, Denmark, Mei 2011
  • Advanced electrical steel characterisation of electrical machines subjected to high levels of mechanical stress: automotive traction – Dennis Van Hoecke, Sigrid Jacobs, Bastien Weber, Emmanuel Attrazic – Inductica 2011, Berlin, Germany, Mei 2011
  • XRF versus GDOES in steel industry applications – M. Madani  – CETAS 2011 – 8th Int. Workshop on Progress in Analytical Chemistry & Materials Characterisation in the Steel and Metal Industries, Luxembourg, Luxembourg, Mei 2011
  • Coupled Eulerian Lagrangian Approach to Model Offshore Platform Movements in Strong Tidal Flows – F. Van den Abeele and J. Vande Voorde –  OMAE 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (June 19-24, 2011), Rotterdam, Netherlands, Juni 2011
  • Relationship between Charpy V-notch impact value and fracture mechanics toughness – P. Thibaux and F. Van den Abeele – The 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), Rotterdam, Netherlands, Juni 2011
  • Hydrogen Transport in 34CrMo4 Martensitic Steels: Influence of Microstructural Defects on H Diffusion – L. MOLI-SANCHEZ, F. MARTIN, E. LEUNIS, J. CHENE – DIMAT2011 – International Conference on Diffusion in Materials, Dijon, France, Juli 2011
  • Etude par thermodesorption (TDS) du piègeage de l’hydrogène dans des aciers martensitiques revêtus  – MOLI-SANCHEZ Laura, CHENE Jacques, LEUNIS Elke, MARTIN Frantz, MARCHETTI Loïc, WERY Martine – Journées <Jeunes Chercheurs 2011>, Lyon, France, Juli 2011
  • The Surface Chemical Characteristics of Galvanised Steel Substrates – S. Ng, M-L Abel, J.F. Watts and J. Wielant – ECASIA 2011 [European Conference on Applications of Surface and Interface Analysis ], Cardiff, United Kingdom, September 2011
  • Hydrogen behaviour in  34CrMo4 martensitic steels: influence of microstructural defects on H trapping and embrittlement  – Laura Moli-Sanchez, Frantz Martin, Elke Leunis, Jacques Chêne, Martine Wery – WHTC2011 – 4th World Hydrogen Technologies Convention, Glasgow, United Kingdom, September 2011
  • Temperature distribution for several material grades in direct-drive PM synchronous generators for 5 MW wind turbines – Damian Kowal, Peter Sergeant, Luc Dupré, Lode Vandenbossche – 20th Soft Magnetic Materials Conference, Kos, Greece, September 2011
  • Study of the hydrogen traps in a high strength TRIP steel by Thermal Desorption Spectroscopy, X-ray Diffraction and Differential Scanning Calorimetry – D. Pérez Escobar, M. Verhaege, L. Duprez, K. Verbeken – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • H-embrittlement mechanisms in 34CrMo4 martensitic steels – L. Moli-Sanchez, J. Chêne, F. Martin, E. Leunis – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • Constant Load Testing with In-Situ hydrogen Charging on Martensitic Ultra High Strength Steel – L. Duprez, M. Arafin, F. Van den Abeele, N. Bernier, D. B. Rosado, J. De Mey, V. Van Speybroeck – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • In-situ mechanical evaluation of hydrogen embrittlement for TRIP, FB, DP and HSLA steels – T. Depover, D. Pérez Escobar, E. Wallaert, M. Verhaege, L. Duprez, K. Verbeken – Steely Hydrogen Conference, Gent, Belgium, September 2011
  • Factors Affecting the Toughness of High Frequency Induction Welded Pipes – Ö. E. Güngör, M. Liebeherr, D. Quidort – AWST 2011 – IIW International Congress on Advances in Welding Science & Technology , Antalya, Turkey, Oktober 2011
  • New Electrical Steels for high performance traction motors – Lode Vandenbossche, Sigrid Jacobs, Dennis Van Hoecke, Bastien Weber, Emmanuel – EEVC October Brussels 26-28, 2011, Brussels, Belgium, October 2011
  • Investigation of fatigue improvement techniques for welds – H. Ahmed, C.H.J. Gerritsen & T. Baaten – BIL/NIL welding symposium, Gent, Belgium, November 2011
  • Development and weldability assessment of heavy gauge X80 line pipe steel for spiral welded pipe – Martin Liebeherr, Özlem Esma Güngör, David Quidort, Denis Lèbre, Nenad Ilić – CBMM Welding of High Strength Pipeline Steels, International Seminar 28-30 November 2011, Araxa, Brazil, , Brazil, November 2011